Sump Pump Shop:
Page 1 | Page 2 | Page 3 | Page 4 | Page 5 | Page 6 | Page 7 | Page 8 | Page 9 | Page 10 | Page 11 | Page 12 | Page 13 | Page 14
 Little Giant SPDK-112, Sump Pump Discharge Kit, 1 1/2" x 24' Hose (599302) Little Giant SPDK-112, Sump Pump Discharge Kit, 1 1/2" x 24' Hose (599302) The 599302 model is a 1-1/2" kit in white. The 1-1/4" and 1-1/2" kits work with all types of sump pumps. They are ideal for discharging water out of the basement sump to a safe location outside of the home. Each kit includes 24' corrugated polyethylene hose, ABS thread x barbed adapter and galvanized steel clamp. Little Giant ES33D1-20, 1/3 HP, 40 GPM @ 10' - Automatic Submersible Sump/Effluent Energy Saving Pump w/ Vertical Diaphragm Switch, 20' power cord (506421) 1/3 HP, Submersible Sump / Effluent Pump The ES33D1-20 pump from Little Giant is an energy-saving, high performance, fully submersible sump/effluent pump, designed for the professional plumbing contractor for use in residential and light commercial applications. Automatic operation is acheived with a diaphragm pressure switch. The ES Series Pumps draw less energy while delivering greater pump flow and overall performance. Uses include basement sumps, excavations, loading docks, construction sites, underground passageways, and other applications requiring high volume water dispersal. Little Giant ES33D1-20, 1/3 HP, 40 GPM @ 10' - Automatic Submersible Sump/Effluent Energy Saving Pump w/ Vertical Diaphragm Switch, 20' power cord (506421) Specifications: • 1/3 HP, 115 Volt, 20' Power Cord • Powerful Permanent Split Capacitor (PSC) motor for high starting and running torque has upper sleeve and lower ball bearings • 3/8" solids handling capability • Mechanical shaft seal (stainless steel spring, nitrile parts, carbon and ceramic faces) assures maximum protection against pump failure. • Epoxy coated cast iron motor housing for corrosion and rust resistance. • Vortex style, engineered thermoplastic impeller • Oil-filled motor housing for lifetime bearing lubrication and maximum heat dissipation • 1-1/2" FNPT vertical discharge • Automatic operation with vertical diaphragm pressure switch operates pump when water depth is approximately 11" and shuts pump off in approximately 5" of water (switch is non-adjustable) Little Giant ES33D1-20, 1/3 HP, 40 GPM @ 10' - Automatic Submersible Sump/Effluent Energy Saving Pump w/ Vertical Diaphragm Switch, 20' power cord (506421) Features: • Horsepower 1/3 • Flow 52 GPM @ 5' of Head • Cord Length 20' • Shut Off 20' • Voltage 115 • Hertz 60 • Amps 5 • Watts 475 • Weight 30 lbs. • Height 9.3" • Width 11.8" • Length 9.8" Little Giant ES33V1-10, 1/3 HP, 40 GPM @ 10' - Automatic Submersible Sump/Effluent Energy Saving Pump w/ Vertical Mechanical Float Switch, 10' power cord (506422) 1/3 HP, Submersible Sump / Effluent Pump The ES33V1-10 pump from Little Giant is an energy-saving, high performance, fully submersible sump / effluent pumps, designed for the professional plumbing contractor for use in residential and light commercial applications. Automatic operation is acheived with a vertical mechanical switch. The ES Series Pumps draw less energy while delivering greater pump flow and overall performance. Uses include basement sumps, excavations, loading docks, construction sites, underground passageways and other applications requiring Little Giant ES33V1-10, 1/3 HP, 40 GPM @ 10' - Automatic Submersible Sump/Effluent Energy Saving Pump w/ Vertical Mechanical Float Switch, 10' power cord (506422) Specifications: • 1/3 HP, 115 Volt, 10' Power Cord • Powerful Permanent Split Capacitor (PSC) motor for high starting and running torque, with upper sleeve and lower ball bearings. • 3/8" solids handling capability • Mechanical shaft seal (stainless steel spring, nitrile parts, carbon and ceramic faces) assures maximum protection against pump failure. • Epoxy coated cast iron motor housing for corrosion and rust resistance. • Vortex style, engineered thermoplastic impeller • Oil-filled motor housing for lifetime bearing lubrication and maximum heat dissipation • 1 1/2" FNPT vertical discharge • Automatic operation with piggyback remote vertical mechanical float switch operates pump in approximately 5" of water and shuts pump off in about 2" of water Little Giant ES33V1-10, 1/3 HP, 40 GPM @ 10' - Automatic Submersible Sump/Effluent Energy Saving Pump w/ Vertical Mechanical Float Switch, 10' power cord (506422) Features: • Horsepower 1/3 • Flow 52 GPM @ 5' of Head • Cord Length 10' • Shut Off 20' • Voltage 115 • Hertz 60 • Amps 5 • Watts 475 • Weight 28 lbs. • Height 9.3" • Width 11.8" • Length 9.8" Little Giant 10-CIM, 1/2 HP, 83 GPM - Manual Submersible Sump Pump, 10' power cord (510055) Big John Submersible Sump Pumps - 10 Series Provide efficient,, trouble-free service for extended or continuous use in moving large volumes of water. Available with thermal overload protection in manual or automatic models, with epoxy coated cast iron pump housing and oil-filled motor housing. Ideal for use in excavation, crawl space, basements, underground passageways, loading docks, grain elevators, construction sites, cooling towers, fire cleanup and other applications requiring high volume water dispersal. Little Giant 10-CIM, 1/2 HP, 83 GPM - Manual Submersible Sump Pump, 10' power cord (510055) Features: • 1/2 HP Split Phase • 83 GPM (314 LPM) @ 5' (1.52m) Maximum flow rate • 23" (7m) Maximum Head • Liquid Temp. to 140F (60C) • 1 1/2 (38.1mm) FNPT Discharge • Epoxy coated cast iron housing • Nylon Impeller • Cast iron Voulte • Carbon/Ceramic Shaft Seal • Upper and lower ball bearings • 115V, 60Hz, 11 amps • 10' (3m) power cord Little Giant 10-CIM, 1/2 HP, 83 GPM - Manual Submersible Sump Pump, 10' power cord (510055) Specifications: • Flow 5000 GPH @ 5' • Cord Length 10' • Shut Off 23' • Voltage 115 • Hertz 60 • Amps 11 • Watts 1100 • Weight 37 lbs. • Height 10.2" • Width 8.6" • Length 9.3" * Image displayed is of automatic version Little Giant ES33V1-20 , 1/3 HP, 40 GPM @ 10' - Automatic Submersible Sump/Effluent Energy Saving Pump w/ Vertical Mechanical Float Switch, 20' power cord (506423) 1/3 HP, Submersible Sump / Effluent Pump The ES33V1-20 pump from Little Giant is an energy-saving, high performance, fully submersible sump / effluent pump, designed for the professional plumbing contractor for use in residential and light commercial applications. Automatic operation is acheived with a piggyback remote vertical mechanical float switch. The ES Series Pumps draw less energy while delivering greater pump flow and overall performance. Uses include basement sumps, excavations, loading docks, construction sites, underground passageways, and other applications requiring high volume water dispersal. Little Giant ES33V1-20 , 1/3 HP, 40 GPM @ 10' - Automatic Submersible Sump/Effluent Energy Saving Pump w/ Vertical Mechanical Float Switch, 20' power cord (506423) Specifications: • 1/3 HP, 115 Volt, 20' Power Cord • Powerful Permanent Split Capacitor (PSC) motor for high starting and running torque, with upper sleeve and lower ball bearings. • 3/8" solids handling capability • Mechanical shaft seal (stainless steel spring, nitrile parts, carbon and ceramic faces) assures maximum protection against pump failure. • Epoxy coated cast iron motor housing for corrosion and rust resistance. • Vortex style, engineered thermoplastic impeller • Oil-filled motor housing for lifetime bearing lubrication and maximum heat dissipation • 1 1/2" FNPT vertical discharge • Automatic operation with piggyback remote vertical mechanical float switch operates pump in approximately 5" of water and shuts pump off in about 2" of water Little Giant ES33V1-20 , 1/3 HP, 40 GPM @ 10' - Automatic Submersible Sump/Effluent Energy Saving Pump w/ Vertical Mechanical Float Switch, 20' power cord (506423) Features: • Horsepower 1/3 • Flow 52 GPM @ 5' of Head • Cord Length 20' • Shut Off 20' • Voltage 115 • Hertz 60 • Amps 5 • Watts 475 • Weight 30 lbs. • Height 9.3" • Width 11.8" • Length 9.8"
|
 Little Giant ES33W1-10, 1/3 HP, 40 GPM @ 10' - Automatic Submersible Sump/Effluent Energy Saving Pump w/ Wide Angle Float Switch, 10' power cord (506424) Little Giant 1/3 HP, 40 GPM @ 10' - Automatic Submersible Sump/Effluent Energy Saving Pump w/ Wide Angle Float Switch, 10' power cord (506424) 1/3 HP, Submersible Sump / Effluent Pump The ES33W1-10 pump from Little Giant is an energy-saving, high performance, fully submersible sump / effluent pump, designed for the professional plumbing contractor for use in residential and light commercial applications. Automatic operation is acheived with a piggyback wide angle remote float switch. The ES Series Pumps draw less energy while delivering greater pump flow and overall performance. Little Giant 1/3 HP, 40 GPM @ 10' - Automatic Submersible Sump/Effluent Energy Saving Pump w/ Wide Angle Float Switch, 10' power cord (506424) Specifications: • 1/3 HP, 115 Volt, 10' Power Cord • Powerful Permanent Split Capacitor (PSC) motor for high starting and running torque, with upper sleeve and lower ball bearings. • 3/8" solids handling capability • Mechanical shaft seal (stainless steel spring, nitrile parts, carbon and ceramic faces) assures maximum protection against pump failure. • Epoxy coated cast iron motor housing for corrosion and rust resistance. • Vortex style, engineered thermoplastic impeller • Oil-filled motor housing for lifetime bearing lubrication and maximum heat dissipation • 1 1/2" FNPT vertical discharge • Automatic operation with piggyback wide angle remote float switch operates pump in approximately 12" of water and shuts pump off in about 4" of water. Little Giant 1/3 HP, 40 GPM @ 10' - Automatic Submersible Sump/Effluent Energy Saving Pump w/ Wide Angle Float Switch, 10' power cord (506424) Features: • Horsepower 1/3 Features: • Flow 52 GPM @ 5' of Head • Cord Length 10' • Shut Off 20' • Voltage 115 • Hertz 60 • Amps 5 • Watts 475 • Weight 28 lbs. • Height 9.3" • Width 11.8" • Length 9.8" Little Giant VS-P2800, 1/3 HP, 46 GPM - Automatic Vertical Sump Pump w/ snap action Float Switch, 8' power cord (547151) Big John Vertical Sump/Effluent Pump Designed for residential and light to moderate commercial duty. Available with thermal overload protection, corrosion-proof polypropylee volute and adjustable "Snap-Action" Float Switch. Little Giant VS-P2800, 1/3 HP, 46 GPM - Automatic Vertical Sump Pump w/ snap action Float Switch, 8' power cord (547151) Features: • 1/3 HP motor • 46 GPM at 5 ft. of head • 17' Max head • 1/4" solids handling • 1 1/4" FNPT discharge • ABS plastic Volute • PVC Impeller • Automatic operation • Automatic float switch activator • Adjustible Switch on, Switch off • 8 ft. power cord Little Giant VS-P2800, 1/3 HP, 46 GPM - Automatic Vertical Sump Pump w/ snap action Float Switch, 8' power cord (547151) Features: • Flow 2800GPM @ 5' • Cord Length 8' • Shut Off 17' • Voltage 115 • Hertz 60 • Amps 4 • Watts 316 • Weight 16 lbs. • Height 31.2" • Width 9.6" • Length 9.6" Little Giant ES33W1-20 ,1/3 HP, 40 GPM @ 10' - Automatic Submersible Sump/Effluent Energy Saving Pump w/ Wide Angle Float Switch, 20' power cord (506425) 1/3 HP, Submersible Sump / Effluent Pump The ES33W1-20 pump from Little Giant is an energy-saving, high performance, fully submersible sump / effluent pump, designed for the professional plumbing contractor for use in residential and light commercial applications. Automatic operation is acheived with a piggyback wide angle remote float switch. The ES Series Pumps draw less energy while delivering greater pump flow and overall performance. Uses include basement sumps, excavations, loading docks, construction sites, underground passageways, and other applications requiring high volume water dispersal. Little Giant ES33W1-20 ,1/3 HP, 40 GPM @ 10' - Automatic Submersible Sump/Effluent Energy Saving Pump w/ Wide Angle Float Switch, 20' power cord (506425) Specifications: • 1/3 HP, 115 Volt, 20' Power Cord • Powerful Permanent Split Capacitor (PSC) motor for high starting and running torque, with upper sleeve and lower ball bearings. • 3/8" solids handling capability • Mechanical shaft seal (stainless steel spring, nitrile parts, carbon and ceramic faces) assures maximum protection against pump failure. • Epoxy coated cast iron motor housing for corrosion and rust resistance. • 1 1/2" FNPT vertical discharge • Oil-filled motor housing for lifetime bearing lubrication and maximum heat dissipation • Vortex style, engineered thermoplastic impeller • Automatic operation with piggyback wide angle remote float switch operates pump in approximately 12" of water and shuts pump off in about 4" of water Little Giant ES33W1-20 ,1/3 HP, 40 GPM @ 10' - Automatic Submersible Sump/Effluent Energy Saving Pump w/ Wide Angle Float Switch, 20' power cord (506425) Features: • Horsepower 1/3 • Flow 52 GPM @ 5' of Head • Cord Length 20' • Shut Off 20' • Voltage 115 • Hertz 60 • Amps 5 • Watts 475 • Weight 27.5 lbs. • Height 9.3" • Width 11.8" • Length 9.8" Little Giant TSW-SP 1/3 HP, 45 GPM - TSW Sump Pump, 10' power cord (507700) TSW 1/3 HP Submersible Sump Pump The TSW Submersible Sump Pump is an innovative alternative to the traditional submersible sump pumps. This pump features a solid state "IntelliSwitch" automatic switch and alarm circuit that eliminates the potential hang ups seen with float switches. Little Giant TSW-SP 1/3 HP, 45 GPM - TSW Sump Pump, 10' power cord (507700) Specifications: • Horsepower 1/3 • Flow 45 GPM @ 5' of Head • Cord Length 10' • Shut Off 32' • Voltage 115 • Hertz 60 • Amps 4.5 • Watts 475 • Weight 13.8 lbs. • Height 15" • Width 7.75" • Length 8.75" • Center discharge (1-1/2" NPT) Little Giant 8-CIA-VDS, 4/10 HP, 45 GPM - Automatic Submersible Sump Pump w/ vertical diaphram switch, 10' power cord (508059) 8 Series 4/10 HP Submersible Sump Pump with cast iron housing, polypropylene base, polycarbonate cover, theraml overload protection. Vertical diaphragm switch with "on" level at aproximately 9" and "off" at approximately 3". Little Giant 8-CIA-VDS, 4/10 HP, 45 GPM - Automatic Submersible Sump Pump w/ vertical diaphram switch, 10' power cord (508059) Features: • 4/10 HP Shaded Pole Motor • 54 GPM (204 LPM) @ 5' (1.52m) Maximum flow rate • 22.9' (65.98m) Maximum Head • Liquid temp. to 140F (60c) • 1 1/4" (31.8m) FNPT Adapter • 1 1/2"FNPT (38.1mm) Discharge • Epoxy coated csat iron housing • Polycarbonate cover • Polypropylene Volute • Polypropylene Impeller • Carbon/ceramic shaft seal • Upper and lower Sintered Sleeve bearings • Automatic Operation Little Giant 8-CIA-VDS, 4/10 HP, 45 GPM - Automatic Submersible Sump Pump w/ vertical diaphram switch, 10' power cord (508059) Specifications: • Horsepower 4/10 • Flow 54 GPM @ 5' • Cord Length 10' • Shut Off 22.9' • Voltage 115 • Hertz 50/60 • Amps 10 • Watts 830 • Weight 20.25 • Height 7.3 • Width 10.5 • Length 9.5
|
 Little Giant ES40M1-10, 4/10 HP, 60 GPM @ 10' - Manual Energy Savings Submersible Solids Handling Pump, 10' power cord (509460) Little Giant ES40M1-10, 4/10 HP, 60 GPM @ 10' - Manual Energy Savings Submersible Solids Handling Pump, 10' power cord (509460) ES40M1-10 4/10 HP The ES40 model pumps from Little Giant are energy-saving, high performance, fully submersible sewage/effluent/high-capacity sump pumps, designed for the professional plumbing contractor. The ES Series Pumps draw less energy while delivering greater pump flow and overall performance. Little Giant ES40M1-10, 4/10 HP, 60 GPM @ 10' - Manual Energy Savings Submersible Solids Handling Pump, 10' power cord (509460) Features: • Powerful Permanent Split Capacitor (PSC) motor for high starting and running torque, with energy-conserving low amp draw. • Vortex style, engineered thermoplastic impeller • 2" solids handling capability • Mechanical seal (stainless steel spring, nitrile parts, carbon and ceramic faces) assures maximum protection against pump failure. • Rugged cast iron pump housing with epoxy coating to resist corrosion • 2" FNPT vertical discharge • Oil-filled motor housing for lifetime bearing lubrication and maximum heat dissipation • Manual operation Little Giant ES40M1-10, 4/10 HP, 60 GPM @ 10' - Manual Energy Savings Submersible Solids Handling Pump, 10' power cord (509460) Specifications: • Manual operation. • Horsepower 4/10 • Flow 95 GPM @ 5' of Head • Cord Length 10' • Shut Off 18' • Voltage 115 • Hertz 60 • Amps 8.9 • Watts 870 • Weight 52 lbs. • Height 14.8" • Width 9.8" • Length 12" Little Giant 9E-CIM, 4/10 HP, 57 GPM, 230V - Manual Submersible Sump Effluent Pump, 15' power cord (509250) Eliminator® Effluent Pumps - 9E Series The Eliminator submersible pumps from Little Giant are specifically engineered to handle the tough demanding tasks for effluent and wastewater transfer with high efficiency and long term dependability. The Eliminators include pumps for use in Residential, Commercial, Industrial and Agricultural applications with light to medium transfer demands. For dewatering, effluent waste, wastewater and handling where such materials must be moved upward from a collection area to sewer or septic lines, or drainage areas, the Eliminators are an ideal solution. Little Giant 9E-CIM, 4/10 HP, 57 GPM, 230V - Manual Submersible Sump Effluent Pump, 15' power cord (509250) Features: • Handles liquid and solid waste materials up to 3/4" diameter. • Cast iron pump housing with protective epoxy coating for corrosion and rust resistance. • Oil filled motor housing for lifetime lubrication and rapid heat dissipation. • Stainless steel screws, bolts, handle, and seal assembly. • Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces). • Thermal overload protection. • Manual operation. • 1-1/2" Discharge. Little Giant 9E-CIM, 4/10 HP, 57 GPM, 230V - Manual Submersible Sump Effluent Pump, 15' power cord (509250) Specification: • Horsepower 4/10 • Flow 57 GPM @ 5' of Head • Cord Length 15' • Shut Off 23 ft. • Voltage 230 • Hertz 60 • Amps 12.3 • Watts 1000 • Weight 27 lbs. • Height 9.2" • Width 6.8" • Length 9.6" Little Giant ES60M1-10, 6/10 HP, 127 GPM @ 10' - Energy Savings, Submersible, Solids Handling Manual Pump, 10' power cord (511462) ES60M1-20 6/10 HP Wastewater and Sewage Pump The ES60 model pumps from Little Giant are energy-saving, high performance, fully submersible sewage/effluent/high-capacity sump pumps, designed for the professional plumbing contractor. The ES Series Pumps draw less energy while delivering greater pump flow and overall performance. Little Giant ES60M1-10, 6/10 HP, 127 GPM @ 10' - Energy Savings, Submersible, Solids Handling Manual Pump, 10' power cord (511462) Features: • Powerful Permanent Split Capacitor (PSC) motor for high starting and running torque, with energy-conserving low amp draw. • Cast iron 2 vane non-clog impeller • 2" solids handling capability • Mechanical seal (stainless steel spring, nitrile parts, carbon and ceramic faces) assures maximum protection against pump failure. • Rugged cast iron pump housing with epoxy coating to resist corrosion • 2" FNPT vertical discharge installed, with optional 3" included • Oil-filled motor housing for lifetime bearing lubrication and maximum heat dissipation • Manual operation Little Giant ES60M1-10, 6/10 HP, 127 GPM @ 10' - Energy Savings, Submersible, Solids Handling Manual Pump, 10' power cord (511462) Specifications: • Horsepower 6/10 • Flow 155 GPM @ 5' of Head • Cord Length 10' • Shut Off 28' • Voltage 115 • Hertz 60 • Amps 10.8 • Watts 1060 • Weight 68 lbs. • Height 14.88" • Width 10.8" • Length 12.3" Little Giant ES50M2-20 ,1/2 HP, 85 GPM @ 10', 230V - Energy Savings, Submersible, Solids Handling Manual Pump, 20' power cord (511481) ES50M2-20 1/2 HP Wastewater and Sewage Pump The ES50 model pumps from Little Giant are energy-saving, high performance, fully submersible sewage/effluent/high-capacity sump pumps, designed for the professional plumbing contractor. The ES Series Pumps draw less energy while delivering greater pump flow and overall performance. Little Giant ES50M2-20 ,1/2 HP, 85 GPM @ 10', 230V - Energy Savings, Submersible, Solids Handling Manual Pump, 20' power cord (511481) Features: • Powerful Permanent Split Capacitor (PSC) motor for high starting and running torque, with energy-conserving low amp draw. • Vortex style, engineered thermoplastic impeller • 2" solids handling capability • Mechanical seal (stainless steel spring, nitrile parts, carbon and ceramic faces) assures maximum protection against pump failure. • Rugged cast iron pump housing with epoxy coating to resist corrosion • 2" FNPT vertical discharge • Oil-filled motor housing for lifetime bearing lubrication and maximum heat dissipation • Manual operation Little Giant ES50M2-20 ,1/2 HP, 85 GPM @ 10', 230V - Energy Savings, Submersible, Solids Handling Manual Pump, 20' power cord (511481) Specifications: • Horsepower 1/2 • Flow 120 GPM @ 5' of Head • Cord Length 20' • Shut Off 22' • Voltage 230 • Hertz 60 • Amps 5.3 • Watts 1180 • Weight 54 lbs. • Height 14.75" • Width 9.8" • Length 12" Little Giant ES50M1-20 ,1/2 HP, 85 GPM @ 10' - Energy Savings, Submersible, Solids Handling Manual Pump, 20' power cord (511461) ES50M1-20 1/2 HP Wastewater and Sewage Pump The ES50 model pumps from Little Giant are energy-saving, high performance, fully submersible sewage / effluent / high-capacity sump pumps, designed for the professional plumbing contractor. The ES Series Pumps draw less energy while delivering greater pump flow and overall performance. Little Giant ES50M1-20 ,1/2 HP, 85 GPM @ 10' - Energy Savings, Submersible, Solids Handling Manual Pump, 20' power cord (511461) Features: • Powerful Permanent Split Capacitor (PSC) motor for high starting and running torque, with energy-conserving low amp draw. • Vortex style, engineered thermoplastic impeller • 2" solids handling capability • Mechanical seal (stainless steel spring, nitrile parts, carbon and ceramic faces) assures maximum protection against pump failure. • Rugged cast iron pump housing with epoxy coating to resist corrosion • 2" FNPT vertical discharge • Oil-filled motor housing for lifetime bearing lubrication and maximum heat dissipation • Manual operation Little Giant ES50M1-20 ,1/2 HP, 85 GPM @ 10' - Energy Savings, Submersible, Solids Handling Manual Pump, 20' power cord (511461) Specifications: • Horsepower 1/2 • Flow 120 GPM @ 5' of Head • Cord Length 20' • Shut Off 22' • Voltage 115 • Hertz 60 • Amps 10.5 • Watts 1180 • Weight 54 lbs. • Height 14.75" • Width 9.8" • Length 12"
|
 Little Giant 1-YS 1/150 HP, 205 GPH @ 1' Parts Washer Pump - 6' Cord no plug (501020) Little Giant 1-YS 1/150 HP, 205 GPH @ 1' Parts Washer Pump - 6' Cord no plug (501020) Specialty Pumps Submersible pump for use with stoddard solvent and deodorized kerosene submerged parts washer applications only. For pumping unheated metal parts cleaning solvent which is UL classified as PJQU, as described in the Gas and Oil Equipment Directory. These refined petroleum distillates are free from tendency to heat spontaneously; they have a closed cup flash point not lower than 100 degrees F Little Giant 1-YS 1/150 HP, 205 GPH @ 1' Parts Washer Pump - 6' Cord no plug (501020) Features: • 1/2" MNPT Master Builders Conduit Fitting • 1/150 HP Oil filled motor • 205 GPH Maximum flow rate @ 1' • Intermittent Liquid Temp. to 120F • Cast aluminum housing • 1/4" MNPT Discharge • Nylon volute • Nylon Impeller • Viton® double lip Shaft Seal • Polyethlene Screen • Thermal overload protection Little Giant 1-YS 1/150 HP, 205 GPH @ 1' Parts Washer Pump - 6' Cord no plug (501020) Specification: • Horsepower: 1/150 • Flow: 205 GPH @ 1' of Head • Cord Lenght: 6' • Shut Off: 7.4 • Voltage: 115 • Hertz: 60 • Amps: 1.1 • Watts: 70 • Weight: 3.33 Little Giant 1-YS 1/150 HP, 13 LPM 230V - Parts Washer Pump, 1.8 (M) no plug (501026) Parts Washer Pump Submersible, unpainted, aluminum housing pumps with Viton® seals. 1/4" MNPT discharge, master builders conduit fitting. Little Giant 1-YS 1/150 HP, 13 LPM 230V - Parts Washer Pump, 1.8 (M) no plug (501026) Specification: • Horsepower: • Flow: 13 LPM • Cord Length: 6' • Shut Off: 7.4 • Voltage: 230 • Hertz: 50 • Amps: 0.6 • Watts: • Weight: 3.5 Little Giant 1-YS 1/150 HP, 13 LPM 230V - Parts Washer Pump, CE Certified, 1.8m no plug (501027) Parts Washer Pump Submersible, unpainted, aluminum housing pumps with Viton® seals. 1/4" MNPT discharge, master builders conduit fitting. Little Giant 1-YS 1/150 HP, 13 LPM 230V - Parts Washer Pump, CE Certified, 1.8m no plug (501027) Specification: • Horsepower: • Flow: 13 LPM • Cord Length: 6' • Shut Off: 6.2 • Voltage: 230 • Hertz: 50 • Amps: 0.6 • Watts: • Weight: 3.5 Little Giant 1-YS 1/150 HP, 205 GPH (13LPM), 230V - Parts Washer Pump, (1.8m) power cord no plug (501036) Specialty Pumps Submersible pump for use with stoddard solvent and deodorized kerosene submerged parts washer applications only. For pumping unheated metal parts cleaning solvent which is UL classified as PJQU, as described in the Gas and Oil Equipment Directory. These refined petroleum distillates are free from tendency to heat spontaneously; they have a closed cup flash point not lower than 100 degrees F. Little Giant 1-YS 1/150 HP, 205 GPH (13LPM), 230V - Parts Washer Pump, (1.8m) power cord no plug (501036) Features: • 1/2" MNPT Master Builders Conduit Fitting • 1/150 HP Oil filled motor, 230V • 205 GPH Maximum flow rate @ 1' • Intermittent Liquid Temp. to 120F • Cast aluminum housing • 1/4" MNPT Discharge • Nylon volute • Nylon Impeller • Viton® double lip Shaft Seal • Polyethlene Screen • Thermal overload protection Little Giant 1-YS 1/150 HP, 205 GPH (13LPM), 230V - Parts Washer Pump, (1.8m) power cord no plug (501036) Specification: • Horsepower: 1/150 • Flow: 205 GPH @ 1' of Head • Cord Lenght: 6' • Shut Off: 7.4 • Voltage: 230 • Hertz: 50/60 • Amps: 0.6 • Watts: 70 • Weight: 3.5 Little Giant 2E-NYS 1/40 HP, 300 GPH @ 1' - Parts Washer Pump, 6' power cord no plug (502020) Specialty Pumps Designed for submerged use only, this pump is intended for use in UL listed parts cleaners. For pumping unheated metal parts cleaning solvent which is UL classified as PJQU, as described in the Gas and Oil Equipment Directory. These refined petroleum distillates are free from tendency to heat spontaneously; they have a closed cup flash point not lower than 100 degrees F. Little Giant 2E-NYS 1/40 HP, 300 GPH @ 1' - Parts Washer Pump, 6' power cord no plug (502020) Features: • 1/2" MNPT Conduit Fitting • 1/40 HP Oil filled motor • 300 GPH @ 1' Maximum flow rate • Intermittent Liquid Temp. to 120F • Cast aluminum housing • Hooded intake • 1/4" MNPT discharge • Nylon volute and Impeller • Viton® Shaft Seal • Nylon Screen • Thermal overload protection Little Giant 2E-NYS 1/40 HP, 300 GPH @ 1' - Parts Washer Pump, 6' power cord no plug (502020) Specification: • Horsepower: • Flow: 300 GPH @ 1' of Head • Cord Lenght: 6' • Shut Off: 11.8 • Voltage: 115 • Hertz: 60 • Amps: 1.7 • Watts: • Weight: 4.83
|
 Little Giant 6-CIA-W-LEGS 1/3 HP, 46 GPM - Automatic Submersible Sump Pump w/ legs, 8' power cord (506162) Little Giant 6-CIA-W-LEGS 1/3 HP, 46 GPM - Automatic Submersible Sump Pump w/ legs, 8' power cord (506162) Submersible Sump Pump For residential and light commercial use, the Model 6-CIA sump pumps provide efficient and reliable service. For extended or continuous use in moving large volumes of water, these pumps feature a 1-1/2" discharge with a maximum lift of 18', a polycarbonate cover and a polypropylene volute/base Little Giant 6-CIA-W-LEGS 1/3 HP, 46 GPM - Automatic Submersible Sump Pump w/ legs, 8' power cord (506162) Features: • PVC leg kit to lift the pump off the bottom of the basin to help keep the intake screen free of debris • Cast iron pump housing with protective epoxy coating for corrosion resistance • Oil-filled motor housing for lifetime lubrication and rapid heat dissipation • 1/3 HP shaded pole motor • Stainless steel screws, bolts and handle to protect against corrosion • Mechanical seal (stainless steel spring, nitrile parts, carbon and ceramic faces) to assure maximum protection against pump failure • Upper and lower sintered sleeve bearings for extended motor life • Thermal overload protection • Automatic operation with pressure switch activates pump when water level is between 7" and 10". Pump shuts off when water level falls to between 1" and 4" (3" higher when leg kit is installe (pressure switch is non-adjustable) • 115 volt models are UL and CSA listed Little Giant 6-CIA-W-LEGS 1/3 HP, 46 GPM - Automatic Submersible Sump Pump w/ legs, 8' power cord (506162) Specification: • Horsepower: 1/3 • Flow: 2,750 GPH @ 5' • Cord Lenght: 8' • Shut Off: 18' • Voltage: 115 • Hertz: 50/60 • Amps: 9 • Watts: 720 • Weight: Little Giant 6-CIA 1/3 HP, 46 GPM - Automatic Submersible Sump Pump, 8' power cord (506174) Big John Submersible Sump Pump For residential and light commercial use, the 1/3 HP, automatic submersible sump pump provides effiicent and reliable service. Pumps feature a 1-1/2" discharge with 18' maximum head. Cast iron motor housing is oil-filled for lifetime lubrication and excellent heat dissipation. Polycarbonate cover and polypropylene volute-base Little Giant 6-CIA 1/3 HP, 46 GPM - Automatic Submersible Sump Pump, 8' power cord (506174) Features: • 1/3 HP, 115 Volt, 8' Power Cord • Screened inlet • Epoxy coated cast iron motor housing for corrosion and rust resistance • Oil filled motor housing for lifetime lubrication and rapid heat dissipation • Stainless steel screws, bolts, and handle • Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces) • Automatic operation with pressure switch operates pump when water level is between 7" and 10". Pump shuts off when water level falls to between 1" and 4". (Pressure switch is non-adjustable) • Thermal overload protection Little Giant 6-CIA 1/3 HP, 46 GPM - Automatic Submersible Sump Pump, 8' power cord (506174) Specification: • Horsepower: 1/3 HP • Flow: 2,750 GPH @ 5' • Cord Lenght: 8' • Shut Off: 18' • Voltage: 115 • Hertz: 50/60 • Amps: 9 • Watts: 720 • Weight: 17 Little Giant 6E-CIA-VDS 1/3 HP, 50 GPM - Automatic Sump/Effluent Pump, 10' power cord (506712) Submersible Sump/Effluent Pump The 6E-CIA-VDS "Eliminator" submersible pump from Little Giant is specifically engineered to handle the tough tasks of wastewater and effluent waste transfer with high efficiency and long term dependability. For residential and light commercial use, the pump has a cast iron, oil-filled motor housing for lifetime lubrication and rapid heat dissipation. Pump has a 1-1/2" FNPT discharge and a 20' maximum head Little Giant 6E-CIA-VDS 1/3 HP, 50 GPM - Automatic Sump/Effluent Pump, 10' power cord (506712) Features: • 1/3 HP, 115 Volt, 10' Power Cord • Handles liquid and solid waste materials up to 1/2" diameter solids • Epoxy coated cast iron motor housing for corrosion and rust resistance • Oil-filled motor housing for lifetime lubrication and rapid heat dissipation • Stainless steel screws, bolts, and handle • Mechanical shaft seal (stainless steel spring, nitrile parts, carbon and ceramic faces) • Automatic operation with vertical diaphragm pressure switch operates pump when water depth is approximately 10" and shuts pump off in approximately 4" of water (switch is non-adjustable) • Thermal overload protection Little Giant 6E-CIA-VDS 1/3 HP, 50 GPM - Automatic Sump/Effluent Pump, 10' power cord (506712) Specification: • Horsepower: 1/3 • Flow: 3000 GPH @ 5' of Head • Cord Lenght: 10' • Shut Off: 20' • Voltage: 115 • Hertz: 60 • Amps: 10 • Watts: 750 • Weight: 28.5 Little Giant 6E-CIA-SFS 1/3 HP, 50 GPM (216 LPM), 230V - 6E-CIA-SFS Automatic Submersible Sump/Effluent Pump, 15' (4.6m)power cord (506720) Submersible Sump/Effluent Pump The 6E-CIA-SFS "Eliminator" submersible pump from Little Giant is specifically engineered to handle the tough demanding tasks of wastewater and effluent waste transfer with high efficiency and long term dependability. For residential and light commercial use, the automatic submersible sump/effluent pump is ideal. Pump has a 1-1/2" FNPT discharge and 20' maximum head. Cast iron motor housing is oil-filled for lifetime lubrication and rapid heat dissipation. Little Giant 6E-CIA-SFS 1/3 HP, 50 GPM (216 LPM), 230V - 6E-CIA-SFS Automatic Submersible Sump/Effluent Pump, 15' (4.6m)power cord (506720) Features: • 1/3 HP, 230 volt, 15' (4.6m) Power Cord • Handles liquid and solid waste materialup to 1/2" (13mm) diameter solids • Epoxy coated cast iron motor housing for corrosion and rust resistance • Oil filled motor housings for lifetime lubrication and rapid heat dissipation • Stainless steel screws, bolts, handle and seal assembly • Mechanical shaft seal (stainless steel spring, nitrile parts, carbon and ceramic faces) • Automatic operation with integral snap-action float switch has 7" - 10" "On" level range and 2" - 5" "Off" level range • Thermal overload protection Little Giant 6E-CIA-SFS 1/3 HP, 50 GPM (216 LPM), 230V - 6E-CIA-SFS Automatic Submersible Sump/Effluent Pump, 15' (4.6m)power cord (506720) Specification: • Horsepower: 1/3 • Flow: 3000 GPH (216 LPM) @ 5' of Head • Cord Lenght: 15' (4.6m) • Shut Off: 20' • Voltage: 230 • Hertz: 60 • Amps: 4.8 • Watts: 890 • Weight: 28 Little Giant 6E-CIM 1/3 HP, 50 GPM, 230V - 6E-CIM Manual Sump/Effluent Pump, 15' (4.6m) power cord (506730) Submersible Sump/Effluent Pump The 6E-CIM "Eliminator" submersible pump from Little Giant is specifically engineered to handle the tough demanding tasks of wastewater and effluent waste transfer with high efficiency and long term dependability. For residential and light commercial use the 6E-CIM sump/effluent pump is ideal. Pump has a 1-1/2" FNPT discharge and a 20' maximum head. Cast iron motor housing is oil-filled for lifetime lubrication and rapid heat dissipation Little Giant 6E-CIM 1/3 HP, 50 GPM, 230V - 6E-CIM Manual Sump/Effluent Pump, 15' (4.6m) power cord (506730) Features: • 1/3 HP, 230 volt, 15' (4.6m) Power Cord • Handles liquid and solid waste materials up to 1/2" diameter solids • Epoxy coated cast iron motor housing for corrosion and rust resistance • Oil filled motor housing for lifetime lubrication and rapid heat dissipation • Stainless steel screws, bolts, handle and seal assembly • Mechanical shaft seal (stainless steel spring, nitrile parts, carbon and ceramic faces) • Manual operation (pump can easily be converted to automatic operation using the RS-5, VDS1006, or RFSN-9) • Thermal overload protection Little Giant 6E-CIM 1/3 HP, 50 GPM, 230V - 6E-CIM Manual Sump/Effluent Pump, 15' (4.6m) power cord (506730) Specification: • Horsepower: 1/3 • Flow: 3000 GPH @ 5' of Head • Cord Lenght: 15' (4.6m) • Shut Off: 20 ft. • Voltage: 230 • Hertz: 60 • Amps: 4.8 • Watts: 890 • Weight: 27
|
Sump Pump Shop:
Page 1 | Page 2 | Page 3 | Page 4 | Page 5 | Page 6 | Page 7 | Page 8 | Page 9 | Page 10 | Page 11 | Page 12 | Page 13 | Page 14
More sump-pump systems, individual sump pumps and accessories.