Sump Pump Shop:
Page 1 | Page 2 | Page 3 | Page 4 | Page 5 | Page 6 | Page 7 | Page 8 | Page 9 | Page 10 | Page 11 | Page 12 | Page 13 | Page 14
 Little Giant 9E-CIM, 4/10 HP, 57 GPM - Manual Submersible Sump Effluent Pump, 15' power cord (509200) Little Giant 9E-CIM, 4/10 HP, 57 GPM - Manual Submersible Sump Effluent Pump, 15' power cord (509200) Eliminator® Effluent Pumps - 9E Series The Eliminator submersible pumps from Little Giant are specifically engineered to handle the tough demanding tasks for effluent and wastewater transfer with high efficiency and long term dependability. The Eliminators include pumps for use in Residential, Commercial, Industrial and Agricultural applications with light to medium transfer demands. For dewatering, effluent waste, wastewater and handling where such materials must be moved upward from a collection area to sewer or septic lines, or drainage areas, the Eliminators are an ideal solution. Little Giant 9E-CIM, 4/10 HP, 57 GPM - Manual Submersible Sump Effluent Pump, 15' power cord (509200) Features: • Handles liquid and solid waste materials up to 3/4" diameter. • Cast iron pump housing with protective epoxy coating for corrosion and rust resistance. • Oil filled motor housing for lifetime lubrication and rapid heat dissipation. • Stainless steel screws, bolts, handle, and seal assembly. • Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces). • Thermal overload protection. • Manual operation. • 1-1/2" Discharge. Little Giant 9E-CIM, 4/10 HP, 57 GPM - Manual Submersible Sump Effluent Pump, 15' power cord (509200) Specification: • Horsepower 4/10 • Flow 57 GPM @ 5' of Head • Cord Length 15' • Shut Off 23 ft. • Voltage 115 • Hertz 60 • Amps 12.3 • Watts 1000 • Weight 27 lbs. • Height 9.2" • Width 6.8" • Length 9.6" Little Giant SPM-14 1/4 HP, 32 GPM - Sump Pump (577113) Little Giant's submersible sump pumps are designed to provide efficient, trouble-free service in moving large volumes of water. Water Out applications ideal for these models are excavation, crawl spaces, basements, loading docks, construction sites and other applications requiring high volume water dispersal. Little Giant SPM-14 1/4 HP, 32 GPM - Sump Pump (577113) Features: • 1/4 HP Shaded Pole Motor • Intermittent Liquid Temp. up to 120F • 1 1/2" FNPT Discharge • Handles 3/16" Solids • Cast-iron Housing • ABS Volute • Nylon, Glass-filled Impeller • Carbon/Ceramic Shaft Seal • On Level: 12"-14" • Off Level: 5"-7" • 10' Power Cord Little Giant SPM-14 1/4 HP, 32 GPM - Sump Pump (577113) Specifications: • Horsepower: 1/4 • Flow: 32 GPM @ 5' • Cord Length: 10' • Shut Off: 22' • Voltage: 115 • Hertz: 60 • Amps: 7.6 • Watts: 560 • Weight: 16 lbs. • Height: 10.5" • Width: 8.5" • Length: 6.2" Little Giant SP-14-RFS 1/4 HP, 32 GPM - Sump Pump w/ Remote Float Switch, 10' power cord (577114) 1/4 HP Submersible Sump Pump The SP-14-RFS submersible sump pump with a Remote Float Switch is designed to provide efficient, trouble-free service in moving large volumes of water. Water out applications ideal for this model are excavation, crawl spaces, basemetns, loading docks, and construction sites. Little Giant SP-14-RFS 1/4 HP, 32 GPM - Sump Pump w/ Remote Float Switch, 10' power cord (577114) Features: • 1/4 HP Shaded Pole Motor • Intermittent Liquid Temp. up to 120F • 1 1/2" FNPT Discharge • Handles 3/16" Solids • Cast-iron Housing • ABS Volute • Nylon, Glass-filled Impeller • Carbon/Ceramic Shaft Seal • On Level: 12"-14" • Off Level: 5"-7" • 10' Power Cord Little Giant SP-14-RFS 1/4 HP, 32 GPM - Sump Pump w/ Remote Float Switch, 10' power cord (577114) Specifications: • Horsepower 1/4 • Flow 32 GPM @ 5' • Cord Length 10' • Shut Off 22' • Voltage 115 • Hertz 60 • Amps 7.6 • Watts 560 • Weight 16.2 lbs. • Height 10.5" • Width 6.2" • Length 8.5" Little Giant 9E-CIM, 4/10 HP, 57 GPM - Manual Submersible Sump Effluent Pump, 25' power cord (509225) Eliminator® Effluent Pumps - 9E Series The Eliminator submersible pumps from Little Giant are specifically engineered to handle the tough demanding tasks for effluent and demanding tasks for wastewater and effluent waste transfer with high efficiency and long term dependability. The Eliminators include pumps for use in Residential, Commercial, Industrial and Agricultural applications with light to medium transfer demands. For dewatering, effluent waste, wastewater and handling where such materials must be moved upward from a collection area to sewer or septic lines, or drainage areas, the Eliminators are an ideal solution. Little Giant 9E-CIM, 4/10 HP, 57 GPM - Manual Submersible Sump Effluent Pump, 25' power cord (509225) Features: • Handles liquid and solid waste materials up to 3/4" diameter. • Cast iron pump housing with protective epoxy coating for corrosion and rust resistance. • Oil filled motor housing for lifetime lubrication and rapid heat dissipation. • Stainless steel screws, bolts, handle, and seal assembly. • Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces). • Thermal overload protection. • Manual operation. • 1-1/2" Discharge. Little Giant 9E-CIM, 4/10 HP, 57 GPM - Manual Submersible Sump Effluent Pump, 25' power cord (509225) Specifications: • Horsepower 4/10 • Flow 57 GPM @ 5' of Head • Cord Length 25 ft. • Shut Off 23 ft. • Voltage 115 • Hertz 60 • Amps 12.3 • Watts 1000 • Weight 27 Lbs. • Height 9.2" • Width 6.8" • Length 9.6" Little Giant SP-14-RVMS 1/4 HP, 32 GPM - Sump Pump w/ Remote Vertical Master Switch, 10' power cord (577115) 1/4 HP Submersible Sump Pump The SP-14-RVMS submersible sump pump with a Remote Vertical Master Switch is designed to provide efficient, trouble-free service in moving large volumes of water. Water out applications ideal for this model are excavation, crawl spaces, basements, loading docks, and construction sites. Little Giant SP-14-RVMS 1/4 HP, 32 GPM - Sump Pump w/ Remote Vertical Master Switch, 10' power cord (577115) Features: • 1/4 HP Shaded Pole Motor • Intermittent Liquid Temp. up to 120F • 1 1/2" FNPT Discharge • Handles 3/16" Solids • Cast-iron Housing • ABS Volute • Nylon, Glass-filled Impeller • Carbon/Ceramic Shaft Seal • On Level: 6"-7" • Off Level: 1 1/2"-2 1/2" • 10' Power Cord Little Giant SP-14-RVMS 1/4 HP, 32 GPM - Sump Pump w/ Remote Vertical Master Switch, 10' power cord (577115) Specifications: • Horsepower 1/4 • Flow 32 GPM @ 5' • Cord Length 10' • Shut Off 22' • Voltage 115 • Hertz 60 • Amps 7.6 • Watts 560 • Weight 16.2 lbs. • Height 11" • Width 6.2" • Length 8.5"
|
 Little Giant 9EH-CIM, 4/10 HP, 70 GPM, 230V - Manual Submersible Sump Effluent Pump, 20' power cord (509340) Little Giant 9EH-CIM, 4/10 HP, 70 GPM, 230V - Manual Submersible Sump Effluent Pump, 20' power cord (509340) Eliminator® Series Sump/Effluent Pumps - 9EH The Model 9EH Series De-watering and Effluent pumps are especially designed for residential and light to medium commercial use. Pumps feature a 1-1/2" discharge with head capacity to 32', glass-filled nylon cover and ABS base. Little Giant 9EH-CIM, 4/10 HP, 70 GPM, 230V - Manual Submersible Sump Effluent Pump, 20' power cord (509340) Features: • Handles liquids and solid waste materials up to 3/4" diameter • Cast iron pump housing with protective epoxy coating for corrosion resistance • Oil-filled motor housing for lifetime lubrication and rapid heat dissipation • Stainless steel screws, bolts and handle and seal assembly • Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces) • Bearings: Upper Sintered Sleave Bearing and Lower Ball Bearing • Thermal overload protection • Manual operation. • 1-1/2" Discharge. Little Giant 9EH-CIM, 4/10 HP, 70 GPM, 230V - Manual Submersible Sump Effluent Pump, 20' power cord (509340) Specifications: • Horsepower 4/10 • Flow 70 GPM @ 5' of Head • Cord Length 20' • Shut Off 32' • Voltage 230 • Hertz 60 • Amps 6.5 • Watts 1000 • Weight 24 • Height 9.3 • Width 8.95 • Length 11.65 Little Giant SP-14-VDS 1/4 HP, 32 GPM - Sump Pump w/ Vertical Diaphragm Switch, 10' power cord (577120) 1/4 HP Submersible Sump Pump The SP-14-VDS submersible sump pump with a Vertical Diaphragm Switch is designed to provide efficient, trouble-free service in moving large volumes of water. Water out applications ideal for this model are excavation, crawl spaces, basemetns, loading docks, and construction sites. Little Giant SP-14-VDS 1/4 HP, 32 GPM - Sump Pump w/ Vertical Diaphragm Switch, 10' power cord (577120) Features: • 1/4 HP Shaded Pole Motor • Intermittent Liquid Temp. up to 120F • 1 1/2" FNPT Discharge • Handles 3/16" Solids • Cast-iron Housing • ABS Volute • Nylon, Glass-filled Impeller • Carbon/Ceramic Shaft Seal • On Level: 10" • Off Level: 4" • 10' Power Cord Little Giant SP-14-VDS 1/4 HP, 32 GPM - Sump Pump w/ Vertical Diaphragm Switch, 10' power cord (577120) Specifications: • Horsepower 1/4 • Flow 32 GPM @ 5' • Cord Length 10' • Shut Off 22' • Voltage 115 • Hertz 60 • Amps 7.6 • Watts 560 • Weight 17.5 lbs. • Height 10.5" • Width 9.5" • Length 8.5" Little Giant 10-CIA, 1/2 HP, 83 GPM - Automatic Submersible Sump Pump 10' power cord (510155) Big John Submersible Sump Pumps - 10 Series The Big John submersible sump pumps provide efficient, trouble-free service for extended or continuous use in moving large volumes of water. Little Giant's submersible sump pumps are ideals for use in Excavation, Crawl Space, Basement, Underground Passageway, Loading Docks, Grain Elevator, Construction Site, Cooling Tower, Fire Cleanup and other applications requiring high volume water dispersal. Little Giant 10-CIA, 1/2 HP, 83 GPM - Automatic Submersible Sump Pump 10' power cord (510155) Features: • Cast iron pump housing with protective epoxy coating for corrosion and rust resistance. • Oil filled motor housing for lifetime lubrication and rapid heat dissipation • Stainless steel screws, bolts, and handle. • Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces). • Nylon switch housing. • Thermal overload protection. • Automatic models. • Automatic operation with pressure switch operates when water level is between 8-1/2" to 12". Pump shuts off when water level falls to between 1-1/2" - 5" (Pressure switch is non-adjustable). • 1-1/2" Discharge Little Giant 10-CIA, 1/2 HP, 83 GPM - Automatic Submersible Sump Pump 10' power cord (510155) Specifications: • Horsepower 1/2 • Flow 5000 GPH @ 5' of Head • Cord Length 10' • Shut Off 23' • Voltage 115 • Hertz 60 • Amps 11 • Watts 1100 • Weight 37 lbs. • Height 10.3" • Width 9.4" • Length 9.3" Little Giant VS-P2800-RP 1/3 HP, 46 GPM - Automatic Vertical Sump Pump w/ Snap Action Float Switch, 8' power cord (577151) Vertical Sump Pump Pedistal Design allows motor to be out of water and is ideal for residential duty. Available with thermal overload protection and "Snap-Action" Float Switch. Designed for sump water removal only. Little Giant 1/3 HP, 46 GPM - Automatic Vertical Sump Pump Features: • 1/3 HP Shaded Pole Motor with Snap Action Float Switch • Intermittent Liquid Temp. up to 120F • 1 1/4" FNPT Discharge • Thermoplastic Volute and Impeller • On Level: 5"-10" • Off Level 4"-9" • Thermal Overload Protection • For Sump Water Removal Only Little Giant VS-P2800-RP 1/3 HP, 46 GPM - Automatic Vertical Sump Pump w/ Snap Action Float Switch, 8' power cord (577151) Specifications: • Horsepower 1/3 • Flow 2800 GPH @ 5' • Cord Length 8' • Shut Off 17' • Voltage 115 • Hertz 60 • Amps 4 • Watts 316 • Weight 16 lbs. • Height 31.2" • Width 9.6" • Length 9.6" Little Giant 8-CIM 4/10 HP, 45 GPM - Manual Submersible Sump Pump, 25' power cord (508058) Big John Submersible Sump Pumps - 8-CIM Series The Big John submersible sump pumps provide efficient; trouble-free service for extended or continuous use in moving large volumes of water. Little Giant's submersible sump pumps are ideal for use in Excavation; Crawl Space; Basement; Underground Passageway; Loading Docks; Grain Elevator; Construction Site; Cooling Tower; Fire Cleanup and other applications requiring high volume water dispersal. Little Giant 8-CIM 4/10 HP, 45 GPM - Manual Submersible Sump Pump, 25' power cord (508058) Features: • Cast iron pump housings with protective epoxy coating for corrosion and rust resistance. • Oil filled motor housing for lifetime lubrication and rapid heat dissipation. • Stainless steel screws, bolts, and handle. • Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces). • Thermal overload protection. • Manual operation • 1-1/2" Discharge Little Giant 8-CIM 4/10 HP, 45 GPM - Manual Submersible Sump Pump, 25' power cord (508058) Specifications: • Horsepower 4/10 • Flow 54 GPM @ 5' of Head • Cord Length 25 ft. • Shut Off 22.9 ft. • Voltage 115 • Hertz 60 • Amps 10 • Watts 830 • Weight 19.8 lbs. • Height 6" • Width 8.5" • Length 9.5"
|
 Little Giant 10-CIA, 1/2 HP, 83 GPM - Automatic Submersible Sump Pump, 25' power cord (510156) Little Giant 10-CIA, 1/2 HP, 83 GPM - Automatic Submersible Sump Pump, 25' power cord (510156) Big John Submersible Sump Pumps - 10 Series The Big John submersible sump pumps provide efficient, trouble-free service for extended or continuous use in moving large volumes of water. Little Giant's submersible sump pumps are ideals for use in Excavation, Crawl Space, Basement, Underground Passageway, Loading Docks, Grain Elevator, Construction Site, Cooling Tower, Fire Cleanup and other applications requiring high volume water dispersal. Little Giant 10-CIA, 1/2 HP, 83 GPM - Automatic Submersible Sump Pump, 25' power cord (510156) Features: • Cast bronze or cast iron pump housings with protective epoxy coating for corrosion and rust resistance. • Oil filled motor housing for lifetime lubrication and rapid heat dissipation • Stainless steel screws, bolts, and handle. • Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces). • Nylon switch housing. • Thermal overload protection. • Automatic operation • Automatic operation with pressure switch operates when water level is between 8-1/2" to 12". Pump shuts off when water level falls to between 1-1/2" to 5" (Pressure switch is non-adjustable). • 1-1/2" Discharge Little Giant 10-CIA, 1/2 HP, 83 GPM - Automatic Submersible Sump Pump, 25' power cord (510156) Specifications: • Horsepower 1/2 • Flow 5000 GPH @ 5' of Head • Cord Length 25' • Shut Off 23' • Voltage 115 • Hertz 60 • Amps 11 • Watts 1100 • Weight 39 lbs. • Height 10.3" • Width 9.4" • Length 9.3" Little Giant Sump Pump Switch Repair Kit (599310) for the 6-CIA-ML (WRSC-6) Little Giant SP-13 1/3 HP, 59 GPM - Sump Pump w/ Integral Float Switch, 10' power cord (577102) 1/3 HP Submersible Sump Pump 1/3 HP sump pump with integral float switch is ideal for heavy duty use in basements or light commercial applications needing frequent water drainage. Handles 1/2" solids with 1 1/2 FNPT discharge. Little Giant SP-13 1/3 HP, 59 GPM - Sump Pump w/ Integral Float Switch, 10' power cord (577102) Features: • 1/3 HP Shaded Pole Motor • Intermittent Liquid Temp. up to 120F • 1 1/2" Discharge • Cast-iron Housing • ABS Volute • Nylow, Glass-filled Impeller • Carbon/Ceramic Shaft Seal • Minimum Basin Size 18" dia. x 24" deep • Handles 1/2" Solids • On Level: 14"-16" • Off Level: 6"-8" • 10' Power Cord Little Giant SP-13 1/3 HP, 59 GPM - Sump Pump w/ Integral Float Switch, 10' power cord (577102) Specifications: • Horsepower 1/3 • Flow 59 GPM @ 5' • Cord Length 10' • Shut Off 17.3' • Voltage 115 • Hertz 60 • Amps 9 • Watts 700 • Weight 26 lbs. • Height 10.6" • Width 7.6" • Length 10.2" Little Giant 20E-CIM, 2 HP, 135 GPM, 230V - Manual Submersible High Head Effluent Pump, 20' power cord (520200) Magnum Series Effluent Pumps - 20E Series The Magnum submersible pumps from Little Giant are specifically engineered to handle the tough demanding tasks of wastewater and effluent waste transfer with high efficiency and long term dependability. The Magnum series includes pumps for use in Residential, Commercial Industrial and Agricultural applications with light to medium transfer demands. For dewatering, effluent waste and wastewater handling where such materials must be moved upward form a collection area to sewer or septic lines, or drainage areas, the Magnum is an ideal solution. Little Giant 20E-CIM, 2 HP, 135 GPM, 230V - Manual Submersible High Head Effluent Pump, 20' power cord (520200) Features: • Cast iron pump housing with protective epoxy coating for corrosion and rust resistance. • Handles liquids and solid waste materials up to 3/4" diameter. • 2" virtical Discharge • Oil-filled motor housing for life time lubrication and rapid head dissipation. • Upper and lower ball bearings. • Stainless steel screws, bolts, handle and seal assembly. • Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces). • Thermal overload protection on single phase units. • Brass impeller. • Capacitor start on single phase units. • Continuous Duty Rated - This means the pump ratings are within the motor manufacturer's recommended working limits when the pump is operated continuously under conditions shown in the manufacturer's published ratings. Little Giant 20E-CIM, 2 HP, 135 GPM, 230V - Manual Submersible High Head Effluent Pump, 20' power cord (520200) Specifications: • Horsepower 2 • Flow 135 GPM @ 20' of Head • Cord Length 20' • Shut Off 110' • Voltage 230 • Hertz 60 • Amps 16.4 • Watts 3872 • Weight 92 lbs. • Height 17.75" • Width 8.42" • Length 12.93" Little Giant 6-CIA-VDS, 1/3 HP, 45 GPM - Automatic Submersible Sump Pump w/ vertical diaphram switch, 10' power cord (506268) Big John Submersible Sump Pump For residential and light commercial use, the 6-CIA-VDS, automatic sump pump provides efficient and reiliable service. Pump has a 1-1/2" discharge with an 18' maximum head. Cast iron motor housing is oil-filled for lifetime lubrication and excellent heat dissipation. Polycarbonate cover and Polypropylene volute-base. Little Giant 6-CIA-VDS, 1/3 HP, 45 GPM - Automatic Submersible Sump Pump w/ vertical diaphram switch, 10' power cord (506268) Features: • 1/3 HP, 115 Volt, 10' Power Cord • Screened inlet • Epoxy coated cast iron motor housing for corrosion and rust resistance. • Oil-filled motor housing for lifetime lubrication and rapid heat dissipation • Stainless steel screws, bolts, and handle • Mechanical shaft seal (stainless steel spring, nitrile parts, carbon and ceramic faces) • Automatic operation with vertical diaphragm pressure switch operates pump when water depth is approximately 9" and shuts pump off in approximately 3" of water (switch is non-adjustable) • Thermal overload protection. Little Giant 6-CIA-VDS, 1/3 HP, 45 GPM - Automatic Submersible Sump Pump w/ vertical diaphram switch, 10' power cord (506268) Specifications: • Flow 2750 GPH @ 5' of Head • Cord Length 10' • Shut Off 18' • Voltage 115 • Hertz 50/60 • Amps 9 • Watts 720 • Weight 18 lbs. • Height 7.3" • Width 10.5" • Length 9.5"
|
 Little Giant SP-12 1/2 HP, 73 GPM - Sump Pump w/ Integral Float Switch, 10' power cord (577103) Little Giant SP-12 1/2 HP, 73 GPM - Sump Pump w/ Integral Float Switch, 10' power cord (577103) 1/2 HP Submersible Sump Pump Ideal for heavy duty use in basements or light commercial applications needing frequent water drainage. Minimum basin size of 18" dia. x 24" deep; handles 1/2" solids. Little Giant SP-12 1/2 HP, 73 GPM - Sump Pump w/ Integral Float Switch, 10' power cord (577103) Features: • 1/2 HP Shaded Pole Motor • 73 GPM @ 5' • Intermittent Liquid Temp. up to 120F • 1 1/2" Discharge • Cast Iron Housing • ABS Volute • Nylon, Glass-filled Impeller • Carbon/Ceramic Shaft Seal • 10' Power Cord • Thermal Overload Protection Little Giant SP-12 1/2 HP, 73 GPM - Sump Pump w/ Integral Float Switch, 10' power cord (577103) Specifications: • Horsepower 1/2 • Flow 73 GPM @ 5' • Cord Length 10' • Shut Off 21.2' • Voltage 115 • Hertz 60 • Amps 11.5 • Watts 910 • Weight 28 lbs. • Height 10.6" • Width 7.6" • Length 10.2" Little Giant 10-CIA-VDS 1/2 HP, 83 GPM - Automatic Submersible Sump Pump w/ vertical diaphragm switch, 25' power cord (510056) Big John Submersible Sump Pumps - 10 Series The Big John submersible sump pumps provide efficient, trouble-free service for extended or continuous use in moving large volumes of water. A choice of manual or automatic versions with various switch configurations provides the user the right pump for their needs. Little Giant's submersible sump pumps are ideals for use in Excavation, Crawl Space, Basement, Underground Passageway, Loading Docks, Grain Elevator, Construction Site, Cooling Tower, Fire Cleanup and other applications requiring high volume water dispersal. Little Giant 10-CIA-VDS 1/2 HP, 83 GPM - Automatic Submersible Sump Pump w/ vertical diaphragm switch, 25' power cord (510056) Features: • Epoxy coated cast iron pump housing • 1/2 HP Split Phase Motor • Stainless steel screws, bolts, and handle • Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces) • Nylon switch housing • Thermal overload protection • Manual and automatic models • Automatic operation with pressure switch operates when water level is between 8-1/2" to 12". Pump shuts off when water level falls to between 1-1/2" - 5" (Pressure switch is non-adjustable) Little Giant 10-CIA-VDS 1/2 HP, 83 GPM - Automatic Submersible Sump Pump w/ vertical diaphragm switch, 25' power cord (510056) Specifications: • Horsepower 1/2 • Flow 5000 GPH @ 5' of Head • Cord Length 10' • Shut Off 23' • Voltage 115 • Hertz 60 • Amps 11 • Watts 1100 • Weight 39 lbs. • Height 10.2" • Width 8.6" • Length 14.3" Little Giant PP-1, 1/10 HP, 275 GPH - PP-1 Transfer Pump, 6' power cord (555100) Non-Submersible, Self-Priming Transfer Pumps This lightweight, portable pump, with self-priming action can be used to empty waterbeds, drain water heaters or aquariums, pump out a basement, transfer water to an RV, pump boat bilges, pump out stock tanks, and in just about any other application where water needs to be transferred. Intermittent duty is 45 minutes on 15 minutes off. Little Giant PP-1, 1/10 HP, 275 GPH - PP-1 Transfer Pump, 6' power cord (555100) Features: • Motor - 1/10HP • 115 VAC 6' power cord • Operates In-line only • Intermittent Liquid Temp to - 120° F....49° C • Maximum flow rate - 275 GPH @ 1', 1040 LPH @ 30 cm. • Intake and Discharge - 3/8" (9.5 mm) garden hose thread • Volute and Housing - Polypropylene • Impeller - Buna-N • Shaft Seal - Nitrile • Operation - Manual, Intermittent Duty • General water transfer • Empty water beds • Empty water heaters Little Giant PP-1, 1/10 HP, 275 GPH - PP-1 Transfer Pump, 6' power cord (555100) Features: • Flow 275 GPH @ 1' of Head • Cord Length 6' • Voltage 115 • Hertz 50/60 • Amps 1.75 • Watts 171 • Weight 5 lbs. • Height 3.4" • Width 4" • Length 6.2" Little Giant 12-CBM 1/2 HP, 83 GPM - Bronze Manual Submersible Sump Pump, 10' power cord (512055) Big John Submersible Sump Pumps - 12 Series The Big John submersible sump pumps provide efficient, trouble-free service for extended or continuous use in moving large volumes of water. Little Giant's submersible sump pumps are ideals for use in Excavation, Crawl Space, Basement, Underground Passageway, Loading Docks, Grain Elevator, Construction Site, Cooling Tower, Fire Cleanup and other applications requiring high volume water dispersal. Little Giant 12-CBM 1/2 HP, 83 GPM - Bronze Manual Submersible Sump Pump, 10' power cord (512055) Features: • Cast bronze pump housing for corrosion and rust resistance. • Oil filled motor housing for lifetime lubrication and rapid heat dissipation • Stainless steel screws, bolts, and handle. • Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces). • Nylon switch housing. • Thermal overload protection. • Manual operation • 1-1/2" Discharge Little Giant 12-CBM 1/2 HP, 83 GPM - Bronze Manual Submersible Sump Pump, 10' power cord (512055) Specifications: • Horsepower 1/2 • Flow 5000 GPH @ 5' of Head • Cord Length 10' • Shut Off 26' • Voltage 115 • Hertz 60 • Amps 11 • Watts 1100 • Weight 40 lbs. • Height 10.2" • Width 8.6" • Length 9.3" Little Giant 6-CIA-RS, 1/3 HP, 45 GPM - Automatic Submersible Sump Pump w/ remote switch, 10' power cord (506267) Big John Submersible Sump Pump For residential and light commercial use, the 6-CIA-RS automatic submersible sump pump provides effiicent and reliable service. Pump features a 1-1/2" discharge with an 18' maximum head. Cast iron motor housing is oil-filled for lifetime lubrication and excellent heat dissipation. Polycarbonate cover and polypropylene volute-base. Little Giant 6-CIA-RS, 1/3 HP, 45 GPM - Automatic Submersible Sump Pump w/ remote switch, 10' power cord (506267) Features: • 1/3 HP, 115 Volt, 10' Power Cord • Screened inlet • Epoxy coated cast iron motor housing for corrosion and rust resistance. • Oil filled motor housing for lifetime lubrication and rapid heat dissipation. • Stainless steel screws, bolts, and handle. • Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces). • Automatic operation with piggyback plug remote pressure switch operates pump when water level is between 7" and 10". Pump shuts off when water level falls to between 1" and 4". (Pressure switch is non-adjustable). • Thermal overload protection Little Giant 6-CIA-RS, 1/3 HP, 45 GPM - Automatic Submersible Sump Pump w/ remote switch, 10' power cord (506267) Specifications: • Flow 2750 GPH @ 5' of Head • Cord Length 10' • Shut Off 18' • Voltage 115 • Hertz 50/60 • Amps 9 • Watts 720 • Weight 17.5 lbs. • Height 7.3" • Width 7.3" • Length 9.5"
|
 Little Giant 12-CBA 1/2 HP, 83 GPM - Bronze Automatic Submersible Sump Pump, 25' power cord (512125) Little Giant 12-CBA 1/2 HP, 83 GPM - Bronze Automatic Submersible Sump Pump, 25' power cord (512125) Big John Submersible Sump Pumps - 12 Series The Big John submersible sump pumps provide efficient, trouble-free service for extended or continuous use in moving large volumes of water. Little Giant's submersible sump pumps are ideals for use in Excavation, Crawl Space, Basement, Underground Passageway, Loading Docks, Grain Elevator, Construction Site, Cooling Tower, Fire Cleanup and other applications requiring high volume water dispersal. Little Giant 12-CBA 1/2 HP, 83 GPM - Bronze Automatic Submersible Sump Pump, 25' power cord (512125) Features: • Cast bronze pump housings for corrosion and rust resistance. • Oil filled motor housing for lifetime lubrication and rapid heat dissipation • Stainless steel screws, bolts, and handle. Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces). • Nylon switch housing. • Thermal overload protection. • Automatic operation • Automatic operation with pressure switch operates when water level is between 8-1/2" to 12". Pump shuts off when water level falls to between 1-1/2" - 5" (Pressure switch is non-adjustable). Little Giant 12-CBA 1/2 HP, 83 GPM - Bronze Automatic Submersible Sump Pump, 25' power cord (512125) Specifications: • 1-1/2 FNPT discharge • Horsepower 1/2 • Flow 5000 GPH @ 5' of Head • Cord Length 25' • Shut Off 26' • Voltage 115 • Hertz 60 • Amps 11 • Watts 1100 • Weight 41 lbs. • Height 10.3" • Width 9.4" • Length 9.3" Little Giant PPS-1, 1/10 HP, 275 GPH - Transfer Pump, 6' power cord (555150) Potent Water-Transfer Pumps This lightweight, portable pump, with self-priming action can be used to empty waterbeds, drain water heaters or aquariums, pump out a basement, transfer water to an RV, pump boat bilges, pump out stock tanks, and in just about any other application where water needs to be transferred. Intermittent duty is 45 minutes on 15 minutes off. Set includes PP-1 (see 555100) pump which is dual threaded with both 3/8" FNPT and 3/4" GHT (Garden Hose Thread) intake and discharge. Two 10' (3m) hoses with vacuum/screen attachement for inlet hose. Thermally protected. Little Giant PPS-1, 1/10 HP, 275 GPH - Transfer Pump, 6' power cord (555150) Features: • Motor - 1/10HP • Maximum flow rate - 275 GPH @ 1', 1040 LPH @ 30cm. • 115 VAC 6' power cord • Intake and Discharge - 3/8" Male Garden Hose Threads • Volute and Housing - Polypropylene • Impeller - Buna-N • Shaft Seal - Nitrile • General water transfer • Empties waterbeds • Drains water heaters • Pump operates In-line only • Kit includes two 10' sections of garden hose and a vacuum/screen attachment for use on inlet hose. Attachment allows water to be removed down to 1/8". • Intermittent Liquid Temp to - 120° F....49° C • Operation - Manual, Intermittent Duty Little Giant PPS-1, 1/10 HP, 275 GPH - Transfer Pump, 6' power cord (555150) Specifications: • Flow 275 GPH @ 1' of Head • Cord Length 6' • Voltage 115 • Hertz 50/60 • Amps 1.75 • Watts 171 • Weight 8 lbs, • Height 3.4" • Width 4" • Length 6.2" Little Giant SPDK-114, Sump Pump Discharge Kit, 1 1/4" x 24' Hose (599301) The 599301 model is a 1-1/4" kit in black. The 1-1/4" and 1-1/2" kits work with all types of sump pumps. They are ideal for discharging water out of the basement sump to a safe location outside of the home. Each kit includes 24' corrugated polyethylene hose, ABS thread x barbed adapter and galvanized steel clamp. Little Giant 6-CIM, 1/3 HP, 45 GPM (175LPM), 230V - Manual Submersible Sump Pump, 12' (3.6m) power cord (506266) Big John Submersible Sump Pump For residential and light commercial use, the 6-CIM manual submersible sump pump provides effiicent and reliable service. Pumps has a 1-1/2" discharge with an 18' maximum head. Cast iron motor housing is oil-filled for lifetime lubrication and excellent heat dissipation. Polycarbonate cover and polypropylene volute-base. Little Giant 6-CIM, 1/3 HP, 45 GPM (175LPM), 230V - Manual Submersible Sump Pump, 12' (3.6m) power cord (506266) Features: • 1/3 HP, 230 Volt, 12' (3.6m) Power Cord • Screened inlet • Epoxy coated cast iron motor housing for corrosion and rust resistance. • Oil filled motor housing for lifetime lubrication and rapid heat dissipation. • Stainless steel screws, bolts, and handle. • Mechanical shaft seal (stainless steel spring, nitrile parts, carbon and ceramic faces). • Manual operation (pump can easily be converted to automatic operation using the RS-5 or RFSN-9) • Thermal overload protection. • 1-1/4" FNPT x 1-1/2" MNPT Discharge Adapter Little Giant 6-CIM, 1/3 HP, 45 GPM (175LPM), 230V - Manual Submersible Sump Pump, 12' (3.6m) power cord (506266) Specifications: • Flow 2750 GPH (175LPM) @ 5' of Head • Cord Length 12' (3.6m) • Shut Off 18' • Voltage 230 • Hertz 50/60 • Amps 4.5 • Watts 720 • Weight 18.75 lbs. • Height 6" • Width 8.5" • Length 9.5" Little Giant SPDK-112, Sump Pump Discharge Kit, 1 1/2" x 24' Hose (599302) The 599302 model is a 1-1/2" kit in white. The 1-1/4" and 1-1/2" kits work with all types of sump pumps. They are ideal for discharging water out of the basement sump to a safe location outside of the home. Each kit includes 24' corrugated polyethylene hose, ABS thread x barbed adapter and galvanized steel clamp.
|
Sump Pump Shop:
Page 1 | Page 2 | Page 3 | Page 4 | Page 5 | Page 6 | Page 7 | Page 8 | Page 9 | Page 10 | Page 11 | Page 12 | Page 13 | Page 14
More sump-pump systems, individual sump pumps and accessories.