Sump Pumps: Shop 1

EBARA EPD-10MT4 PRO-DRAINER Manual Sump Pump, 1 HP, 3 x 460

EBARA EPD-10MT4 PRO-DRAINER Manual Sump Pump The Ebara Stainless Steel Series Drainage Sump Pumps offer you a complete comprehensive range of submersible drainage pumps for pumping slurry, dirty and semi-dirty water. Never before have benefits this large been offered in a drainage pump. The versatility and rugged construction of these pumps allow for confident use in fixed or mobile service. Features are: 304 stainless built-in overload width automatic reset-air-filled continuous duty motor-oil-lubricated, double-faced mechanical seal. EBARA EPD-10MT4 PRO-DRAINER Manual Sump Pump Features: • High quality stainless steel • 2" solids handling • Single and three phase models available • Motor is 2 pole, dry submerged, rated continuous duty • Class F motor insulation • 104°F max. fluid temperature continuous operation, fully submerged; 140° F intermittent operation • Manual operation • Auto float switch is mechanical/non-mercury • NPT thread discharge 1-1/2" • Double mechanical seal with viton elastomers • Shielded ball bearings 50,000 hour • Vortex impeller • Thermal overloads (single phase models) • Flows to 185 GPM, heads to 65 feet • 1 Horse Power • 3 Phase • 460 Volts EBARA EPD-10MT4 PRO-DRAINER Manual Sump Pump Applications: • Removal of waste from sumps, washing machines, wet bars, water softeners, dehumidifiers and cisterns • Quickly removes water from swimming pools, spas, hot tubs and other water storage structures • Removes water from excavation ditches or pits, underground passages, mines, grain elevators, farm tanks, cooling towers, parking lot drainage pits • Create decorative waterfalls and fountains or other water projects throughout the garden • Wherever you need to move water from one place to another * Image reflects various configurations of pump and does not represent quantity shipped.

EBARA EPD-10MT2 PRO-DRAINER Manual Sump Pump, 1HP, 3 x 230

EBARA EPD-10MT2 PRO-DRAINER Manual Sump Pump, 1HP, 3 x 230 The Ebara Stainless Steel Series Drainage Sump Pumps offer you a complete comprehensive range of submersible drainage pumps for pumping slurry, dirty and semi-dirty water. Never before have benefits this large been offered in a drainage pump. The versatility and rugged construction of these pumps allow for confident use in fixed or mobile service. Features are: 304 stainless-built-in overload width automatic reset-air-filled continuous duty motor-oil-lubricated, double-faced mechanical seal. EBARA EPD-10MT2 PRO-DRAINER Manual Sump Pump Features: • High quality stainless steel • 2" solids handling • Single and three phase models available • Motor is 2 pole, dry submerged, rated continuous duty • Class F motor insulation • 104°F max. fluid temperature continuous operation, fully submerged; 140° F intermittent operation • Manual operation • Auto float switch is mechanical/non-mercury • NPT thread discharge 1-1/2" • Double mechanical seal with viton elastomers • Shielded ball bearings 50,000 hour • Vortex impeller • Thermal overloads (single phase models) • Flows to 185 GPM, heads to 65 feet • 1 Horse Power • 3 Phase • 230 Volts EBARA EPD-10MT2 PRO-DRAINER Manual Sump Pump Applications: • Removal of waste from sumps, washing machines, wet bars, water softeners, dehumidifiers and cisterns • Quickly removes water from swimming pools, spas, hot tubs and other water storage structures • Removes water from excavation ditches or pits, underground passages, mines, grain elevators, farm tanks, cooling towers, parking lot drainage pits • Create decorative waterfalls and fountains or other water projects throughout the garden • Wherever you need to move water from one place to another * Image reflects various configurations of pump and does not represent quantity shipped.

EBARA EPD-7MT4 PRO-DRAINER Manual Sump Pump, 3/4 HP, 3 x 460

EBARA EPD-7MT4 PRO-DRAINER Manual Sump Pump, 3/4 HP, 3 x 460 The Ebara Stainless Steel Series Drainage Sump Pumps offer you a complete comprehensive range of submersible drainage pumps for pumping slurry, dirty and semi-dirty water. Never before have benefits this large been offered in a drainage pump. The versatility and rugged construction of these pumps allow for confident use in fixed or mobile service. Features are: 304 stainless-built-in overload width automatic reset-air-filled continuous duty motor-oil-lubricated, double-faced mechanical seal. EBARA EPD-7MT4 PRO-DRAINER Manual Sump Pump Features: • High quality stainless steel • 2" solids handling • Single and three phase models available • Motor is 2 pole, dry submerged, rated continuous duty • Class F motor insulation • 104°F max. fluid temperature continuous operation, fully submerged; 140° F intermittent operation • Manual operation • Auto float switch is mechanical/non-mercury • NPT thread discharge 1-1/2" • Double mechanical seal with viton elastomers • Shielded ball bearings 50,000 hour • Vortex impeller • Thermal overloads (single phase models) • Flows to 185 GPM, heads to 65 feet • 3/4 Horse Power • 3 Phase • 460 Volts EBARA EPD-7MT4 PRO-DRAINER Manual Sump Pump Applications: • Removal of waste from sumps, washing machines, wet bars, water softeners, dehumidifiers and cisterns • Quickly removes water from swimming pools, spas, hot tubs and other water storage structures • Removes water from excavation ditches or pits, underground passages, mines, grain elevators, farm tanks, cooling towers, parking lot drainage pits • Create decorative waterfalls and fountains or other water projects throughout the garden • Wherever you need to move water from one place to another * Image reflects various configurations of pump and does not represent quantity shipped.

EBARA EPD-7MT2 PRO-DRAINER Manual Sump Pump, 3/4 HP, 3 x 230

EBARA EPD-7MT2 PRO-DRAINER Manual Sump Pump, 3/4 HP, 3 x 230 The Ebara Stainless Steel Series Drainage Sump Pumps offer you a complete comprehensive range of submersible drainage pumps for pumping slurry, dirty and semi-dirty water. Never before have benefits this large been offered in a drainage pump. The versatility and rugged construction of these pumps allow for confident use in fixed or mobile service. Features are: 304 stainless-built-in overload width automatic reset-air-filled continuous duty motor-oil-lubricated, double-faced mechanical seal. EBARA EPD-7MT2 PRO-DRAINER Manual Sump Pump Features: • High quality stainless steel • 2" solids handling • Single and three phase models available • Motor is 2 pole, dry submerged, rated continuous duty • Class F motor insulation • 104°F max. fluid temperature continuous operation, fully submerged; 140° F intermittent operation • Manual operation • Auto float switch is mechanical/non-mercury • NPT thread discharge 1-1/2" • Double mechanical seal with viton elastomers • Shielded ball bearings 50,000 hour • Vortex impeller • Thermal overloads (single phase models) • Flows to 185 GPM, heads to 65 feet • 3/4 Horse Power • 3 Phase • 230 Volt EBARA EPD-7MT2 PRO-DRAINER Manual Sump Pump Applications: • Removal of waste from sumps, washing machines, wet bars, water softeners, dehumidifiers and cisterns • Quickly removes water from swimming pools, spas, hot tubs and other water storage structures • Removes water from excavation ditches or pits, underground passages, mines, grain elevators, farm tanks, cooling towers, parking lot drainage pits • Create decorative waterfalls and fountains or other water projects throughout the garden • Wherever you need to move water from one place to another * Image reflects various configurations of pump and does not represent quantity shipped.

EBARA EPD-7AS1 PRO-DRAINER Automatic Sump Pump, 3/4 HP, 1 x 115

EBARA EPD-7AS1 PRO-DRAINER Automatic Sump Pump, 3/4 HP, 1 x 115 The Ebara Stainless Steel Series Drainage Sump Pumps offer you a complete comprehensive range of submersible drainage pumps for pumping slurry, dirty and semi-dirty water. Never before have benefits this large been offered in a drainage pump. The versatility and rugged construction of these pumps allow for confident use in fixed or mobile service. Features are: 304 stainless-built-in overload width automatic reset-air-filled continuous duty motor-oil-lubricated, double-faced mechanical seal. EBARA EPD-7AS1 PRO-DRAINER Automatic Sump Pump Features: • High quality stainless steel • 2" solids handling • Single and three phase models available • Motor is 2 pole, dry submerged, rated continuous duty • Class F motor insulation • 104°F max. fluid temperature continuous operation, fully submerged; 140° F intermittent operation • Automatic operation • Auto float switch is mechanical/non-mercury • NPT thread discharge 1-1/2" • Double mechanical seal with viton elastomers • Shielded ball bearings 50,000 hour • Vortex impeller • Thermal overloads (single phase models) • Flows to 185 GPM, heads to 65 feet • 3/4 Horse Power • 1 Phase • 115 Volts EBARA EPD-7AS1 PRO-DRAINER Automatic Sump Pump Applications: • Removal of waste from sumps, washing machines, wet bars, water softeners, dehumidifiers and cisterns • Quickly removes water from swimming pools, spas, hot tubs and other water storage structures • Removes water from excavation ditches or pits, underground passages, mines, grain elevators, farm tanks, cooling towers, parking lot drainage pits • Create decorative waterfalls and fountains or other water projects throughout the garden • Wherever you need to move water from one place to another * Image reflects various configurations of pump and does not represent quantity shipped.

Grundfos SU25-1A10 1/4 HP Sump Pump (96001566)

The Grundfos SU25-1A10 1/4 HP Sump Pump. SPECIFICATIONS - Grundfos SU25-1A10 1/4 HP Sump Pump: • 1/4 HP, 115 volt, single phase • Capacities to 37 GPM • Heads to 16 feet • Discharge size 1-1/2" female NPT • 8' power cord • Solids 3/16" maximum • Fluid temperature range of 40°F to +120°F APPLICATIONS - Grundfos SU25-1A10 1/4 HP Sump Pump: • Basement Sumps • Dewatering • Water Transfer FEATURES and BENEFITS - Grundfos SU25-1A10 1/4 HP Sump Pump: • Lightweight • Corrosion resistant • Impact resistant • Automatic float switch operation • Continuous duty when fully submerged MATERIALS OF CONSTRUCTION - Grundfos SU25-1A10 1/4 HP Sump Pump: • Engineered composite

Grundfos KP150-1M10 1/4 HP Sump Pump (011DC001)

The Grundfos KP150-1M10 1/4 HP Sump Pump. SPECIFICATIONS - Grundfos KP150-1M10 1/4 HP Sump Pump: • 1/4 HP, 115 volt, single phase • Capacities to 62 GPM • Heads to 31 feet • Discharge size 1-1/4" female NPT • 10' power cord • Solids 3/8" maximum • Fluid temperature range of 32°F to +122°F with continuous operation • Fluid temperature range of 23°F to +158°F with intermittent operation • Minimum pumping level of 1/2" APPLICATIONS - Grundfos KP150-1M10 1/4 HP Sump Pump: • Basement Sumps • Dewatering • Water Transfer FEATURES and BENEFITS - Grundfos KP150-1M10 1/4 HP Sump Pump: • Lightweight • Corrosion resistant • Field replaceable power cord • Continuous duty • Manual operation MATERIALS OF CONSTRUCTION - Grundfos KP150-1M10 1/4 HP Sump Pump: • Stainless Steel

Grundfos KP150-1M25 1/4 HP Sump Pump (011DC201)

The Grundfos KP150-1M25 1/4 HP Sump Pump. SPECIFICATIONS - Grundfos KP150-1M25 1/4 HP Sump Pump: • 1/4 HP, 115 volt, single phase • Capacities to 62 GPM • Heads to 31 feet • Discharge size 1-1/4" female NPT • 25' power cord • Solids 3/8" maximum • Fluid temperature range of 32°F to +122°F with continuous operation • Fluid temperature range of 23°F to +158°F with intermittent operation • Minimum pumping level of 1/2" APPLICATIONS - Grundfos KP150-1M25 1/4 HP Sump Pump: • Basement Sumps • Dewatering • Water Transfer FEATURES and BENEFITS - Grundfos KP150-1M25 1/4 HP Sump Pump: • Lightweight • Corrosion resistant • Field replaceable power cord • Continuous duty • Manual operation MATERIALS OF CONSTRUCTION - Grundfos KP150-1M25 1/4 HP Sump Pump: • Stainless Steel

Grundfos KP250-1M10 1/3 HP Sump Pump (012DC001)

The Grundfos KP250-1M10 1/3 HP Sump Pump. SPECIFICATIONS - Grundfos KP250-1M10 1/3 HP Sump Pump: • 1/3 HP, 115 volt, single phase • Capacities to 62 GPM • Heads to 31 feet • Discharge size 1-1/4" female NPT • 10' power cord • Solids 3/8" maximum • Fluid temperature range of 32°F to +122°F with continuous operation • Fluid temperature range of 23°F to +158°F with intermittent operation • Minimum pumping level of 1/2" APPLICATIONS - Grundfos KP250-1M10 1/3 HP Sump Pump: • Basement Sumps • Dewatering • Water Transfer FEATURES and BENEFITS - Grundfos KP250-1M10 1/3 HP Sump Pump: • Lightweight • Corrosion resistant • Field replaceable power cord • Continuous duty • Manual operation MATERIALS OF CONSTRUCTION - Grundfos KP250-1M10 1/3 HP Sump Pump: • Stainless Steel

Grundfos KP250-1M25 1/3 HP Sump Pump (012DC201)

The Grundfos KP250-1M25 1/3 HP Sump Pump. SPECIFICATIONS - Grundfos KP250-1M25 1/3 HP Sump Pump: • 1/3 HP, 115 volt, single phase • Capacities to 62 GPM • Heads to 31 feet • Discharge size 1-1/4" female NPT • 25' power cord • Solids 3/8" maximum • Fluid temperature range of 32°F to +122°F with continuous operation • Fluid temperature range of 23°F to +158°F with intermittent operation • Minimum pumping level of 1/2" APPLICATIONS - Grundfos KP250-1M25 1/3 HP Sump Pump: • Basement Sumps • Dewatering • Water Transfer FEATURES and BENEFITS - Grundfos KP250-1M25 1/3 HP Sump Pump: • Lightweight • Corrosion resistant • Field replaceable power cord • Continuous duty • Manual operation MATERIALS OF CONSTRUCTION - Grundfos KP250-1M25 1/3 HP Sump Pump: • Stainless Steel

Grundfos KP350-1M10 1/2 HP Sump Pump (013DC001)

The Grundfos KP350-1M10 1/2 HP Sump Pump. SPECIFICATIONS - Grundfos KP350-1M10 1/2 HP Sump Pump: • 1/2 HP, 115 volt, single phase • Capacities to 62 GPM • Heads to 31 feet • Discharge size 1-1/4" female NPT • 10' power cord • Solids 3/8" maximum • Fluid temperature range of 32°F to +122°F with continuous operation • Fluid temperature range of 23°F to +158°F with intermittent operation • Minimum pumping level of 1/2" APPLICATIONS - Grundfos KP350-1M10 1/2 HP Sump Pump: • Basement Sumps • Dewatering • Water Transfer FEATURES and BENEFITS - Grundfos KP350-1M10 1/2 HP Sump Pump: • Lightweight • Corrosion resistant • Field replaceable power cord • Continuous duty • Manual operation MATERIALS OF CONSTRUCTION - Grundfos KP350-1M10 1/2 HP Sump Pump: • Stainless Steel

Grundfos KP350-1M25 1/2 HP Sump Pump (013DC201)

The Grundfos KP350-1M25 1/2 HP Sump Pump. SPECIFICATIONS - Grundfos KP350-1M25 1/2 HP Sump Pump: • 1/2 HP, 115 volt, single phase • Capacities to 62 GPM • Heads to 31 feet • Discharge size 1-1/4" female NPT • 25' power cord • Solids 3/8" maximum • Fluid temperature range of 32°F to +122°F with continuous operation • Fluid temperature range of 23°F to +158°F with intermittent operation • Minimum pumping level of 1/2" APPLICATIONS - Grundfos KP350-1M25 1/2 HP Sump Pump: • Basement Sumps • Dewatering • Water Transfer FEATURES and BENEFITS - Grundfos KP350-1M25 1/2 HP Sump Pump: • Lightweight • Corrosion resistant • Field replaceable power cord • Continuous duty • Manual operation MATERIALS OF CONSTRUCTION - Grundfos KP350-1M25 1/2 HP Sump Pump: • Stainless Steel

Grundfos AP12-1M10 1/2 HP Sump Pump (96023926)

The Grundfos AP12-1M10 1/2 HP Sump Pump. SPECIFICATIONS - Grundfos AP12-1M10 1/2 HP Sump Pump: • 1/2 HP, 115 volt, single phase • Capacities to 78 GPM • Heads to 33 feet • Discharge size 1-1/2" female NPT • 10' power cord • Solids 7/16" maximum • Fluid temperature range of 32°F to +131°F • Minimum pumping level of 1-3/8" APPLICATIONS - Grundfos AP12-1M10 1/2 HP Sump Pump: • Basement Sumps • Dewatering • Water Transfer FEATURES and BENEFITS - Grundfos AP12-1M10 1/2 HP Sump Pump: • Lightweight • Corrosion resistant • Field replaceable power cord • Continuous duty when fully submerged • Manual operation MATERIALS OF CONSTRUCTION - Grundfos AP12-1M10 1/2 HP Sump Pump: • Stainless Steel

Grundfos AP12-1M25 1/2 HP Sump Pump (96011036)

The Grundfos AP12-1M25 1/2 HP Sump Pump. SPECIFICATIONS - Grundfos AP12-1M25 1/2 HP Sump Pump: • 1/2 HP, 115 volt, single phase • Capacities to 78 GPM • Heads to 33 feet • Discharge size 1-1/2" female NPT • 25' power cord • Solids 7/16" maximum • Fluid temperature range of 32°F to +131°F • Minimum pumping level of 1-3/8" APPLICATIONS - Grundfos AP12-1M25 1/2 HP Sump Pump: • Basement Sumps • Dewatering • Water Transfer FEATURES and BENEFITS - Grundfos AP12-1M25 1/2 HP Sump Pump: • Lightweight • Corrosion resistant • Field replaceable power cord • Continuous duty when fully submerged • Manual operation MATERIALS OF CONSTRUCTION - Grundfos AP12-1M25 1/2 HP Sump Pump: • Stainless Steel

EBARA EPD-7MS1 PRO-DRAINER Manual Sump Pump, 3/4 HP, 1 x 115

EBARA EPD-7MS1 PRO-DRAINER Manual Sump Pump, 3/4 HP, 1 x 115 The Ebara Stainless Steel Series Drainage Sump Pumps offer you a complete comprehensive range of submersible drainage pumps for pumping slurry, dirty and semi-dirty water. Never before have benefits this large been offered in a drainage pump. The versatility and rugged construction of these pumps allow for confident use in fixed or mobile service. Features are: 304 stainless-built-in overload width automatic reset-air-filled continuous duty motor-oil-lubricated, double-faced mechanical seal. EBARA EPD-7MS1 PRO-DRAINER Manual Sump Pump Features: • High quality stainless steel • 2" solids handling • Single and three phase models available • Motor is 2 pole, dry submerged, rated continuous duty • Class F motor insulation • 104°F max. fluid temperature continuous operation, fully submerged; 140° F intermittent operation • Manual operation • Auto float switch is mechanical/non-mercury • NPT thread discharge 1-1/2" • Double mechanical seal with viton elastomers • Shielded ball bearings 50,000 hour • Vortex impeller • Thermal overloads (single phase models) • Flows to 185 GPM, heads to 65 feet • 3/4 Horse Power • 1 Phase • 115 Volts EBARA EPD-7MS1 PRO-DRAINER Manual Sump Pump Applications: • Removal of waste from sumps, washing machines, wet bars, water softeners, dehumidifiers and cisterns • Quickly removes water from swimming pools, spas, hot tubs and other water storage structures • Removes water from excavation ditches or pits, underground passages, mines, grain elevators, farm tanks, cooling towers, parking lot drainage pits • Create decorative waterfalls and fountains or other water projects throughout the garden • Wherever you need to move water from one place to another * Image reflects various configurations of pump and does not represent quantity shipped.

EBARA EPD-5MT4 PRO-DRAINER Manual Sump Pump, 1/2 HP, 3 x 460

EBARA EPD-5MT4 PRO-DRAINER Manual Sump Pump, 1/2 HP, 3 x 460 The Ebara Stainless Steel Series Drainage Sump Pumps offer you a complete comprehensive range of submersible drainage pumps for pumping slurry, dirty and semi-dirty water. Never before have benefits this large been offered in a drainage pump. The versatility and rugged construction of these pumps allow for confident use in fixed or mobile service. Features are: 304 stainless-built-in overload width automatic reset-air-filled continuous duty motor-oil-lubricated, double-faced mechanical seal. EBARA EPD-5MT4 PRO-DRAINER Manual Sump Pump Features: • High quality stainless steel • 2" solids handling • Single and three phase models available • Motor is 2 pole, dry submerged, rated continuous duty • Class F motor insulation • 104°F max. fluid temperature continuous operation, fully submerged; 140° F intermittent operation • Manual operation • Auto float switch is mechanical/non-mercury • NPT thread discharge 1-1/2" • Double mechanical seal with viton elastomers • Shielded ball bearings 50,000 hour • Vortex impeller • Thermal overloads (single phase models) • Flows to 185 GPM, heads to 65 feet • 1/2 Horse Power • 3 Phase • 460 Volts EBARA EPD-5MT4 PRO-DRAINER Manual Sump Pump Applications: • Removal of waste from sumps, washing machines, wet bars, water softeners, dehumidifiers and cisterns • Quickly removes water from swimming pools, spas, hot tubs and other water storage structures • Removes water from excavation ditches or pits, underground passages, mines, grain elevators, farm tanks, cooling towers, parking lot drainage pits • Create decorative waterfalls and fountains or other water projects throughout the garden • Wherever you need to move water from one place to another * Image reflects various configurations of pump and does not represent quantity shipped.

EBARA EPD-5MT2 PRO-DRAINER Manual Sump Pump, 1/2 HP, 3 x 230

EBARA EPD-5MT2 PRO-DRAINER Manual Sump Pump, 1/2 HP, 3 x 230 The Ebara Stainless Steel Series Drainage Sump Pumps offer you a complete comprehensive range of submersible drainage pumps for pumping slurry, dirty and semi-dirty water. Never before have benefits this large been offered in a drainage pump. The versatility and rugged construction of these pumps allow for confident use in fixed or mobile service. Features are: 304 stainless-built-in overload width automatic reset-air-filled continuous duty motor-oil-lubricated, double-faced mechanical seal. EBARA EPD-5MT2 PRO-DRAINER Manual Sump Pump Features: • High quality stainless steel • 2" solids handling • Single and three phase models available • Motor is 2 pole, dry submerged, rated continuous duty • Class F motor insulation • 104°F max. fluid temperature continuous operation, fully submerged; 140° F intermittent operation • Manual operation • Auto float switch is mechanical/non-mercury • NPT thread discharge 1-1/2" • Double mechanical seal with viton elastomers • Shielded ball bearings 50,000 hour • Vortex impeller • Thermal overloads (single phase models) • Flows to 185 GPM, heads to 65 feet • 1/2 Horse Power • 3 Phase • 230 Volts EBARA EPD-5MT2 PRO-DRAINER Manual Sump Pump Applications: • Removal of waste from sumps, washing machines, wet bars, water softeners, dehumidifiers and cisterns • Quickly removes water from swimming pools, spas, hot tubs and other water storage structures • Removes water from excavation ditches or pits, underground passages, mines, grain elevators, farm tanks, cooling towers, parking lot drainage pits • Create decorative waterfalls and fountains or other water projects throughout the garden • Wherever you need to move water from one place to another * Image reflects various configurations of pump and does not represent quantity shipped.

EBARA EPD-5AS1 PRO-DRAINER Automatic Sump Pump, 1/2 HP, 1 x 115

EBARA EPD-5AS1 PRO-DRAINER Automatic Sump Pump, 1/2 HP, 1 x 115 The Ebara Stainless Steel Series Drainage Sump Pumps offer you a complete comprehensive range of submersible drainage pumps for pumping slurry, dirty and semi-dirty water. Never before have benefits this large been offered in a drainage pump. The versatility and rugged construction of these pumps allow for confident use in fixed or mobile service. Features are: 304 stainless-built-in overload width automatic reset-air-filled continuous duty motor-oil-lubricated, double-faced mechanical seal. EBARA EPD-5AS1 PRO-DRAINER Automatic Sump Pump Features: • High quality stainless steel • 2" solids handling • Single and three phase models available • Motor is 2 pole, dry submerged, rated continuous duty • Class F motor insulation • 104°F max. fluid temperature continuous operation, fully submerged; 140° F intermittent operation • Automatic operation • Auto float switch is mechanical/non-mercury • NPT thread discharge 1-1/2" • Double mechanical seal with viton elastomers • Shielded ball bearings 50,000 hour • Vortex impeller • Thermal overloads (single phase models) • Flows to 185 GPM, heads to 65 feet • 1/2 Horse Power • 1 Phase • 115 Volts EBARA EPD-5AS1 PRO-DRAINER Automatic Sump Pump Applications: • Removal of waste from sumps, washing machines, wet bars, water softeners, dehumidifiers and cisterns • Quickly removes water from swimming pools, spas, hot tubs and other water storage structures • Removes water from excavation ditches or pits, underground passages, mines, grain elevators, farm tanks, cooling towers, parking lot drainage pits • Create decorative waterfalls and fountains or other water projects throughout the garden • Wherever you need to move water from one place to another * Image reflects various configurations of pump and does not represent quantity shipped.

EBARA EPD-5MS1 PRO-DRAINER Manual Sump Pump, 1/2 HP, 1 x 115

EBARA EPD-5MS1 PRO-DRAINER Manual Sump Pump, 1/2 HP, 1 x 115 The Ebara Stainless Steel Series Drainage Sump Pumps offer you a complete comprehensive range of submersible drainage pumps for pumping slurry, dirty and semi-dirty water. Never before have benefits this large been offered in a drainage pump. The versatility and rugged construction of these pumps allow for confident use in fixed or mobile service. Features are: 304 stainless-built-in overload width automatic reset-air-filled continuous duty motor-oil-lubricated, double-faced mechanical seal. EBARA EPD-5MS1 PRO-DRAINER Manual Sump Pump Features: • High quality stainless steel • 2" solids handling • Single and three phase models available • Motor is 2 pole, dry submerged, rated continuous duty • Class F motor insulation • 104°F max. fluid temperature continuous operation, fully submerged; 140° F intermittent operation • Manual operation • Auto float switch is mechanical/non-mercury • NPT thread discharge 1-1/2" • Double mechanical seal with viton elastomers • Shielded ball bearings 50,000 hour • Vortex impeller • Thermal overloads (single phase models) • Flows to 185 GPM, heads to 65 feet • 1/2 Horse Power • 1 Phase • 115 Volts EBARA EPD-5MS1 PRO-DRAINER Manual Sump Pump Applications: • Removal of waste from sumps, washing machines, wet bars, water softeners, dehumidifiers and cisterns • Quickly removes water from swimming pools, spas, hot tubs and other water storage structures • Removes water from excavation ditches or pits, underground passages, mines, grain elevators, farm tanks, cooling towers, parking lot drainage pits • Create decorative waterfalls and fountains or other water projects throughout the garden • Wherever you need to move water from one place to another * Image reflects various configurations of pump and does not represent quantity shipped.

EBARA EPD-3AS1 PRO-DRAINER Automatic Sump Pump, 1/3 HP, 1 x 115

EBARA EPD-3AS1 PRO-DRAINER Automatic Sump Pump, 1/3 HP, 1 x 115 The Ebara Stainless Steel Series Drainage Sump Pumps offer you a complete comprehensive range of submersible drainage pumps for pumping slurry, dirty and semi-dirty water. Never before have benefits this large been offered in a drainage pump. The versatility and rugged construction of these pumps allow for confident use in fixed or mobile service. Features are: 304 stainless-built-in overload width automatic reset-air-filled continuous duty motor-oil-lubricated, double-faced mechanical seal. EBARA EPD-3AS1 PRO-DRAINER Automatic Sump Pump Features: • High quality stainless steel • 2" solids handling • Single and three phase models available • Motor is 2 pole, dry submerged, rated continuous duty • Class F motor insulation • 104°F max. fluid temperature continuous operation, fully submerged; 140° F intermittent operation • Automatic operation 1-1/4" • Auto float switch is mechanical/non-mercury • NPT thread discharge • Double mechanical seal with viton elastomers • Shielded ball bearings 50,000 hour • Vortex impeller • Thermal overloads (single phase models) • Flows to 185 GPM, heads to 65 feet • 1/3 Horse Power • 1 Phase • 115 Volts EBARA EPD-3AS1 PRO-DRAINER Automatic Sump Pump Applications: • Removal of waste from sumps, washing machines, wet bars, water softeners, dehumidifiers and cisterns • Quickly removes water from swimming pools, spas, hot tubs and other water storage structures • Removes water from excavation ditches or pits, underground passages, mines, grain elevators, farm tanks, cooling towers, parking lot drainage pits • Create decorative waterfalls and fountains or other water projects throughout the garden • Wherever you need to move water from one place to another * Image reflects various configurations of pump and does not represent quantity shipped.

EBARA EPD-3MS1 PRO-DRAINER Manual Sump Pump, 1/3 HP, 1 x 115

EBARA EPD-3MS1 PRO-DRAINER Manual Sump Pump, 1/3 HP, 1 x 115 The Ebara Stainless Steel Series Drainage Sump Pumps offer you a complete comprehensive range of submersible drainage pumps for pumping slurry, dirty and semi-dirty water. Never before have benefits this large been offered in a drainage pump. The versatility and rugged construction of these pumps allow for confident use in fixed or mobile service. Features are: 304 stainless-built-in overload width automatic reset-air-filled continuous duty motor-oil-lubricated, double-faced mechanical seal. EBARA EPD-3MS1 PRO-DRAINER Manual Sump Pump Features: • High quality stainless steel • 2" solids handling • Single and three phase models available • Motor is 2 pole, dry submerged, rated continuous duty • Class F motor insulation • 104°F max. fluid temperature continuous operation, fully submerged; 140° F intermittent operation • Automatic and manual operation • Auto float switch is mechanical/non-mercury • NPT thread discharge 1-1/4" • Double mechanical seal with viton elastomers • Shielded ball bearings 50,000 hour • Vortex impeller • Thermal overloads (single phase models) • Flows to 185 GPM, heads to 65 feet • 1/3 Horse Power • 1 Phase • 115 Volts EBARA EPD-3MS1 PRO-DRAINER Manual Sump Pump Applications: • Removal of waste from sumps, washing machines, wet bars, water softeners, dehumidifiers and cisterns • Quickly removes water from swimming pools, spas, hot tubs and other water storage structures • Removes water from excavation ditches or pits, underground passages, mines, grain elevators, farm tanks, cooling towers, parking lot drainage pits • Create decorative waterfalls and fountains or other water projects throughout the garden • Wherever you need to move water from one place to another * Image reflects various configurations of pump and does not represent quantity shipped.

EBARA EPPD-3MS1 PRO-DRAINER Manual Sump Pump, 1/3 HP, 1 x 115

EBARA EPPD-3MS1 PRO-DRAINER Manual Sump Pump, 1/3 HP, 1 x 115 The Ebara Stainless Steel Series Drainage Sump Pumps offer you a complete comprehensive range of submersible drainage pumps for pumping slurry, dirty and semi-dirty water. Never before have benefits this large been offered in a drainage pump. The versatility and rugged construction of these pumps allow for confident use in fixed or mobile service. Features are: 304 stainless-built-in overload width automatic reset-air-filled continuous duty motor-oil-lubricated, double-faced mechanical seal. EBARA EPPD-3MS1 PRO-DRAINER Manual Sump Pump Features: • High quality stainless steel • 2" solids handling • Single and three phase models available • Motor is 2 pole, dry submerged, rated continuous duty • Class F motor insulation • 104°F max. fluid temperature continuous operation, fully submerged; 140° F intermittent operation • Manual operation • Auto float switch is mechanical/non-mercury • NPT thread discharge 1-1/4" • Double mechanical seal with viton elastomers • Shielded ball bearings 50,000 hour • Vortex impeller • Thermal overloads (single phase models) • Flows to 185 GPM, heads to 65 feet • 1/3 Horse Power • 1 Phase • 115 Volts EBARA EPPD-3MS1 PRO-DRAINER Manual Sump Pump Applications: • Removal of waste from sumps, washing machines, wet bars, water softeners, dehumidifiers and cisterns • Quickly removes water from swimming pools, spas, hot tubs and other water storage structures • Removes water from excavation ditches or pits, underground passages, mines, grain elevators, farm tanks, cooling towers, parking lot drainage pits • Create decorative waterfalls and fountains or other water projects throughout the garden • Wherever you need to move water from one place to another * Image reflects various configurations of pump and does not represent quantity shipped.

EBARA EPD-15MT2 PRO-DRAINER Manual Sump Pump, 1-1/2 HP, 3 x 230

EBARA EPD-15MT2 PRO-DRAINER Manual Sump Pump, 1-1/2 HP, 3 x 230 The Ebara Stainless Steel Series Drainage Sump Pumps offer you a complete comprehensive range of submersible drainage pumps for pumping slurry, dirty and semi-dirty water. Never before have benefits this large been offered in a drainage pump. The versatility and rugged construction of these pumps allow for confident use in fixed or mobile service. Features are: 304 stainless-built-in overload width automatic reset-air-filled continuous duty motor-oil-lubricated, double-faced mechanical seal. EBARA EPD-15MT2 PRO-DRAINER Manual Sump Pump Features: • High quality stainless steel • 2" solids handling • Single and three phase models available • Motor is 2 pole, dry submerged, rated continuous duty • Class F motor insulation • 104°F max. fluid temperature continuous operation, fully submerged; 140° F intermittent operation • Manual operation • Auto float switch is mechanical/non-mercury • NPT thread discharge 1-1/2" • Double mechanical seal with viton elastomers • Shielded ball bearings 50,000 hour • Vortex impeller • Thermal overloads (single phase models) • Flows to 185 GPM, heads to 65 feet • 1-1/2 Horse Power • 3 Phase • 230 Volts EBARA EPD-15MT2 PRO-DRAINER Manual Sump Pump Applications: • Removal of waste from sumps, washing machines, wet bars, water softeners, dehumidifiers and cisterns • Quickly removes water from swimming pools, spas, hot tubs and other water storage structures • Removes water from excavation ditches or pits, underground passages, mines, grain elevators, farm tanks, cooling towers, parking lot drainage pits • Create decorative waterfalls and fountains or other water projects throughout the garden • Wherever you need to move water from one place to another * Image reflects various configurations of pump and does not represent quantity shipped.

EBARA EPD-15MT4 PRO-DRAINER Manual Sump Pump, 1-1/2 HP, 3 x 460

EBARA EPD-15MT4 PRO-DRAINER Manual Sump Pump, 1-1/2 HP, 3 x 460 The Ebara Stainless Steel Series Drainage Sump Pumps offer you a complete comprehensive range of submersible drainage pumps for pumping slurry, dirty and semi-dirty water. Never before have benefits this large been offered in a drainage pump. The versatility and rugged construction of these pumps allow for confident use in fixed or mobile service. Features are: 304 stainless-built-in overload width automatic reset-air-filled continuous duty motor-oil-lubricated, double-faced mechanical seal. EBARA EPD-15MT4 PRO-DRAINER Manual Sump Pump Features: • High quality stainless steel • 2" solids handling • Single and three phase models available • Motor is 2 pole, dry submerged, rated continuous duty • Class F motor insulation • 104°F max. fluid temperature continuous operation, fully submerged; 140° F intermittent operation • Manual operation • Auto float switch is mechanical/non-mercury • NPT thread discharge 1-1/2" • Double mechanical seal with viton elastomers • Shielded ball bearings 50,000 hour • Vortex impeller • Thermal overloads (single phase models) • Flows to 185 GPM, heads to 65 feet • 1-1/2 Horse Power • 3 Phase • 460 Volts EBARA EPD-15MT4 PRO-DRAINER Manual Sump Pump Applications: • Removal of waste from sumps, washing machines, wet bars, water softeners, dehumidifiers and cisterns • Quickly removes water from swimming pools, spas, hot tubs and other water storage structures • Removes water from excavation ditches or pits, underground passages, mines, grain elevators, farm tanks, cooling towers, parking lot drainage pits • Create decorative waterfalls and fountains or other water projects throughout the garden • Wherever you need to move water from one place to another * Image reflects various configurations of pump and does not represent quantity shipped.

Little Giant WRS-5, 1/6 HP, 15 GPM @ 5' - Submersible Utility Pump, Water Removal System w/ 5 gal. tank and 10' power cord (505055)

Little Giant WRS-5, 1/6 HP, 15 GPM @ 5' - Submersible Utility Pump, Water Removal System w/ 5 gal. tank and 10' power cord (505055) Drainosaur® Water Removal System Includes 5-gallon polypropylene tank. Tank lid has 1 1/2" FNPT (38.1mm) side intake port, 1 1/2" FNPT (38.1mm) top discharge port, and 2" FNPT (51mm) top vent port. Easy-to-remove filter trap. Also includes 1/6 HP automatic, 5-ASP submersible sump pump with 10' (3m) power cord and 3-prong grounded plug; and 1" (25.4mm) diameter pipe from pump to lid. Basin is IAPMO approved. Little Giant WRS-5, 1/6 HP, 15 GPM @ 5' - Submersible Utility Pump, Water Removal System w/ 5 gal. tank and 10' power cord (505055) Features: • 1/6HP Shaded Pole motor • 115V, 50/60Hz, 5 amps • 15 GPM/56.8 LPM Maximum Flow Rate • 21' (6.4m) Maximum Head • Intermittent Liquid Temp. up to 125°F • 1 1/2" FNPT (38.1mm) discharge • Epoxy coated cast aluminum housing • Nylon volute • Nylon impeller • Vitron® shaft seal • Automatic operation • Diaphragm switch activator • Switch on - 7 3/8" (18.7 cm) • Switch off - 3/4" (1.9cm) # 10' power cord # IAPMO Approved Basin # Pump is UL and CSA Certified Little Giant WRS-5, 1/6 HP, 15 GPM @ 5' - Submersible Utility Pump, Water Removal System w/ 5 gal. tank and 10' power cord (505055) Specifications: • Flow 900 GPH @ 5' of head • Cord Length 10' • Shut Off 21' • Voltage 115 • Hertz 60 • Amps 5 • Watts 380 • Weight 19 lbs. • Height 15.6" • Width 14.5" • Length 14.5"